 Greddy type s install |
  |
 Apr 20 2005, 09:51 AM
Post
#1
|
|
|
Beginner  Group: Members Posts: 37 Joined: 5-April 04 Member No.: 271  |
http://www.dsmtuners.com/forums/showthread...dy+small+nipple
I got mine in the other day and was looking up information on the small nipple on the bov. Please read the above forum... Does anyone know the correct way to install the bov? Do you leave the small nipple open? and What is the flutter noise - does that really cause damage to the turbo. I'm asking cause I left the smaller nipple open and I do have flutter noise after installing the bov. Note* I'm not getting the sound that I want from the bov- going to adjust the screw later today. Anyone have any comments on this?? |
 |
 
|
|
Apr 20 2005, 10:39 AM
Post
#2
|
|
 Zen Master DSM Group: Moderators Posts: 3,008 Joined: 10-January 01 From: in front of you Member No.: 5 |
The flutter noise is representative of compressor surge. You should be able to leave the smaller nipple open to atmosphere and adjust the set screw out to relieve the compressor surge. Basically, the valve isn't opening easily enough.
|
|
|
|
|
Apr 20 2005, 11:34 AM
Post
#3
|
|
|
DSM Tech Wizard Group: Members Posts: 2,404 Joined: 16-December 03 From: Fletcher/Bloomington Member No.: 214 |
Yikes!
-------------------- "I hear he tunes the space shuttle also...and that thing is fast"
|
|
|
|
|
Apr 20 2005, 02:30 PM
Post
#4
|
|
 Eats and sleeps DSM jargin. Group: Moderators Posts: 1,156 Joined: 23-September 02 Member No.: 16 |
yeah, you could set the lower nipple to a vacuum port with a line off the intake manifold after the throttle body that only saw vacuum. I'd use a check valve for this if you're unable to find a port on the tb. that only reads vacuum. This should allow you to set a low spring pressure and still have it seated at idle.
-------------------- my cars breath smells like car food
|
|
|
|
|
Apr 20 2005, 08:46 PM
Post
#5
|
|
|
Web Administrator Yo! Group: Admin Posts: 516 Joined: 30-August 04 From: Mackinaw, IL Member No.: 376 |
Does it flutter when letting off of the accelerator at all boost levels? If so I would soften up the set screw. I think that it is pretty common up to about 7lbs.
-------------------- Fast & Furious on the outside...DSM under the hood!!!
|
|
|
|
|
Apr 21 2005, 11:01 PM
Post
#6
|
|
|
Beginner Group: Members Posts: 37 Joined: 5-April 04 Member No.: 271 |
i adjusted tight, loose, middle.... all over the place... still getting flutter when i let off at high boost. Still not getting the correct setting... should i try connecting the small nipple?
|
|
|
|
|
Apr 22 2005, 07:05 AM
Post
#7
|
|
|
Zen Master DSM Group: Moderators Posts: 3,008 Joined: 10-January 01 From: in front of you Member No.: 5 |
I'd take miami's advice.
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 8th December 2025 - 11:41 AM |
Powered By IP.Board
© 2025 IPS, Inc.