 Pulled the motor from the GVR4 yesterday... |
 Dec 11 2005, 03:33 PM
Post
#1
|
|
|
HONDA KILLER  Group: Members Posts: 14 Joined: 29-October 05 From: Olathe, KS - Urbana, IL Member No.: 679  |
Well, i got the motor out yesterday...
i took the motor apart today... no rod knocks when i turned the motor, no scratches on the cylinder walls... the head looked fine when i took it apart... the block seems fine... So i decided to pull the oil pan. nothings wrong with the rods, no loose rod bolts or anything... look inside the pan, some grim, lil bit of grains of sand dust dirt that built up, a set of valve retainer keepers... no metal shavings... the block seems to be totally fine beside the oil leaks... still need to take the cams out and inspect the rockers and valves. the only thing i saw wrong before pulling the motor... turbo manifold was cracked, the turbine housing was cracked so bad that the wastegate flapper wouldnt seal at all. The clutch is still good... And i bought this 91 Galant vr4 #1580 for $500... comments? |
 |
 
|
 |
Replies
(1 - 3)
|
Dec 11 2005, 07:21 PM
Post
#2
|
|
|
DSM Tech Wizard Group: Members Posts: 2,256 Joined: 10-January 01 From: central IL Member No.: 10 |
Bastard....
 
-------------------- The fastest car I own is a minivan....
|
|
|
|
|
Dec 11 2005, 07:55 PM
Post
#3
|
|
|
HONDA KILLER Group: Members Posts: 14 Joined: 29-October 05 From: Olathe, KS - Urbana, IL Member No.: 679 |
yes.. i know.... i cant wait till its running... MUAHAHAaa..
|
|
|
|
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 8th October 2025 - 02:12 PM |
Powered By IP.Board
© 2025 IPS, Inc.