 1g head, how much? |
 Oct 25 2006, 12:13 PM
Post
#1
|
|||
|
DSMCentral Freak  Group: Members Posts: 400 Joined: 6-November 04 From: Urbana Member No.: 382  |
I am looking into a 91 fwd NA 4g63 for dirt ass cheap, it needs a head and timing belt......
about how much for a 1g head and timing belt? --------------------
|
||
 |
 
|
||
 |
Replies
(1 - 9)
|
Oct 25 2006, 12:38 PM
Post
#2
|
|
 Post Master Group: Members Posts: 908 Joined: 7-October 03 From: Chillicothe, IL Member No.: 182 |
complete?
-------------------- GVR4 866/1000 = the perpetually broken car
|
|
|
|
|
Oct 25 2006, 01:05 PM
Post
#3
|
|||
|
DSMCentral Freak Group: Members Posts: 400 Joined: 6-November 04 From: Urbana Member No.: 382 |
sure, the car should come with a head with cams etc but bad valves............
so I guess all it really needs is valves and the lifters etc could be swapped over --------------------
|
||
|
|
|
||
|
Oct 25 2006, 01:29 PM
Post
#4
|
|
 Zen Master DSM Group: Moderators Posts: 3,008 Joined: 10-January 01 From: in front of you Member No.: 5 |
I have a 6bolt turbo head that I'll sell you for $150. Its the same as an NA head except for the cams. Comes with all the lifters and rockers...and cams if you want them. The cams are bit rusty.
I wouldn't buy a used timing belt if I were you. |
|
|
|
|
Oct 25 2006, 01:34 PM
Post
#5
|
|||
|
DSMCentral Freak Group: Members Posts: 400 Joined: 6-November 04 From: Urbana Member No.: 382 |
QUOTE (natedogg @ Oct 25 2006, 01:29 PM) I have a 6bolt turbo head that I'll sell you for $150. Its the same as an NA head except for the cams. Comes with all the lifters and rockers...and cams if you want them. The cams are bit rusty. I wouldn't buy a used timing belt if I were you. so besides the rusty cams the head is ready to bolt on? no leaky valve seals etc? I wouldnt buy a used timing belt either! they dont last long enough as is! 
--------------------
|
||
|
|
|
||
|
Oct 25 2006, 01:47 PM
Post
#6
|
|
|
Zen Master DSM Group: Moderators Posts: 3,008 Joined: 10-January 01 From: in front of you Member No.: 5 |
I bought the head about a year ago from AWD DSM 1 and its been sitting in my garage ever since. I remember double checking it (right after purchasing and removing the cams) by spraying brake cleaner in the combustion chambers. The cleaner did not leak through to the intake or exhaust ports, so I know the valves are in good shape. I can't say whether the seals will leak oil or not as I've never personally run this head on a car. AWD DSM 1 might be able to give you more information on it if he remembers...
|
|
|
|
|
Oct 25 2006, 03:17 PM
Post
#7
|
|
|
Zen Master DSM Group: Moderators Posts: 3,008 Joined: 10-January 01 From: in front of you Member No.: 5 |
Please PM me for any more questions or comments.
|
|
|
|
|
Oct 25 2006, 03:21 PM
Post
#8
|
|
|
DSM Tech Wizard Group: Members Posts: 2,404 Joined: 16-December 03 From: Fletcher/Bloomington Member No.: 214 |
I assume that the reason you need a head and timing belt is that the engine jumped time. Make sure you check the pistons for any gouges or scratches. If the scratches are significant enough, you may need pistons as well.
Make sure while doing this job you replace the tensioner as well. I would reccomend some ARP head studs and the Mitsu 4-layer headgasket if you're staying mostly stock. -------------------- "I hear he tunes the space shuttle also...and that thing is fast"
|
|
|
|
|
Oct 25 2006, 03:40 PM
Post
#9
|
|
|
DSM Tech Wizard Group: Members Posts: 2,256 Joined: 10-January 01 From: central IL Member No.: 10 |
too many parts bought and sold to remeber that one nate...
 Personally, I'd have it checked at a machine shop. More than likely it will need a quick resurfacing.... 99% of any used one you buy will need resurfaced from my experiences.
-------------------- The fastest car I own is a minivan....
|
|
|
|
|
Nov 7 2006, 10:48 AM
Post
#10
|
|||
|
DSMCentral Freak Group: Members Posts: 400 Joined: 6-November 04 From: Urbana Member No.: 382 |
bought a truck instead
 thanks for the info tho guys 
--------------------
|
||
|
|
|
||
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 12th October 2025 - 07:25 PM |
Powered By IP.Board
© 2025 IPS, Inc.