![]() |
![]() |
![]()
Post
#1
|
|
Beginner ![]() Group: Members Posts: 40 Joined: 23-September 02 From: Chillicothe Member No.: 17 ![]() |
my clutch feels weird it shifts really low I mean almost to the ground. Also It's hard to get into gear, I was wondering if I need to bleed my clutch AGAIN but I don't know. Does that little rubbur thing HAVE to be on the clutch cylider??
|
|
|
![]() |
![]()
Post
#2
|
|
Group: Posts: 0 Joined: -- Member No.: 0 ![]() |
You need to get that plug in ASAP! Even if it's the fill plug you can get your fluid sloshing out as well as letting debris into the transmission.
If it's your drain plug, then your transmission is already toast! :evil: Anyway, there is a real easy fix for low pedal engagement if non ov the other ideas work. This is also assuming that you don't have a leak either. You can replace the slave cylinder push rod with a longer replacement. You can easily make this replacement by finding a long bolt of roughly the same diameter. Cut the head off the bolt. Round both end of the new shaft after you have come up with a slightly longer length. (1/4" to about 1/2" in length should be adequate.) Start long and grind it down as needed to place your pedal comfortably. Obviously you will then losen up the slave cylinder and switch out the push rod. Good luck. Marcus awd4kicks |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 15th October 2025 - 05:57 PM |