![]() |
![]() |
![]() ![]()
Post
#1
|
|
HONDA KILLER ![]() Group: Members Posts: 7 Joined: 24-December 04 Member No.: 400 ![]() |
What is your worst shop that you took your car to fix? mine is http://www.extrememotorsports.com/
![]() ![]() ![]() they took one year to complete my engine and i have to correct their mistakes. three engines almost one year each time.work was done sloppy,parts missing wiring in the wrong place,engine oil leaks,slower than stock.they have no ASE certified mitisubishi mechcanics.didn't tighten down the flywheel and it destroyed the clutch and flywheel.spent over $10,000.00 and got no where. if i had the money i would sue these people and take them to court. If you wish to have work on your vehicle done correctly and excellent people to deal with and very knowledgeable,then i would suggest that you go to www.jacksonautomachine.com for the best shop. ![]() ![]() ![]() |
|
|
![]() |
![]()
Post
#2
|
|
![]() DSMCentral Freak ![]() ![]() ![]() ![]() Group: Members Posts: 317 Joined: 3-October 02 From: Springfield Member No.: 24 ![]() |
QUOTE (xian 1g @ Dec 29 2004, 08:20 AM) a lot of people want to pay the least, buy a used stock motor, but want it to be garunteed to run 24 pounds of boost down the strip. Simple put, they don't want to pay 5 grand for a stage three built motor, that is garunteed to take what ever you can throw at it at the track, and instead, they want to pay 8 hundred for a motor... and then have it replaced when they crank the boost above what it should be. I didnt pay 5 grand but I did go for the stage 3 and it got me 3 rebuild on that block me buying another block with a failure and then me trailoring the whole damn car to the waste of life and then to top it all off I called names and was abused by the guy in the mean time.After I drove all the way to OH I had to pay more just to get the damn car back from the pooper clown..... After this one started to fail we pulled it apart and noticed alot of silicone blocking the coolant pipe.Didnt look accidental if you know what I mean.....Did a bearing replacement as well as a couple of other tricks and sold the whole damn thing for less then half of what I spent on the whole deal......Sometimes going with the Bigger Better Deal is not always the best way. .. my .o2 |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 8th October 2025 - 11:57 PM |