 DSM emulator wanted. |
 Jan 31 2005, 01:17 AM
Post
#1
|
|
 Post Master  Group: Members Posts: 626 Joined: 25-September 02 From: Urbana, IL Member No.: 19  |
PC's don't have the hardware to do that kind of thing. I've run an ECU on the bench before, basically you'll need a couple of frequency generators (CAM signal, MAF signal) and some adjustable resistors for the other sensors. A two channel or better scope is needed to test injector/ignition outputs, while LEDs could be used for testing most of the other outputs. The only thing you'll need a PC for is to run a logger program, or you could use a PALM.
-------------------- Eric Wort
87 White Buick Turbo 'T' (11.71 @ 116.5, 1.61 60ft, slipping trans) 92 Teal Eagle Talon TSi AWD (burn victim) |
 |
 
|
Posts in this topic
  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 8th December 2025 - 12:48 PM |
Powered By IP.Board
© 2025 IPS, Inc.