Welcome Guest ( Log In | Register )

> Fuel Trims?
BudmannG
post Oct 31 2005, 02:05 PM
Post #1


Eats and sleeps DSM jargin.
******

Group: Members
Posts: 1,108
Joined: 2-October 05
From: Waverly, Illinois
Member No.: 636



What Fuel trim do you guys usualy run on your logger? I read some where to try and get them as close to 100% as I could.
Right now my fuel trims are L=139.5 M=127.9 H=134.2

On saturday when I went to Nates, My knock was off the wall 42 was the highest and I think we got it down to 21. Did we do something wrong, or is this right. Not that I don't trust Nates tuning, I just want a second opinion on this. Because I still have knock and my fuel trims are all showing I'm running lean. Unless I'm reading it wrong.


--------------------
Thanks, Bud!
user posted image
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
turbohcar
post Nov 1 2005, 08:38 PM
Post #2


DSM Tech Wizard
*******

Group: Members
Posts: 2,404
Joined: 16-December 03
From: Fletcher/Bloomington
Member No.: 214



I'll have to do a log of airflow but there are spots in this log where it shows 0.0ms of injector pulse during the WOT run. Mind you, this car still retains the stock fuel system and the fuel pump has not been rewired yet.


--------------------
"I hear he tunes the space shuttle also...and that thing is fast"
Go to the top of the page
 
+Quote Post

Posts in this topic
- BudmannG   Fuel Trims?   Oct 31 2005, 02:05 PM
- - natedogg   Your fuel trims are closed loop controlled and dep...   Oct 31 2005, 02:56 PM
- - turbohcar   Well, on my drive home, my fuel trims remained a c...   Oct 31 2005, 06:48 PM
- - ncgalant   Looks like now you have added to much fuel(on the ...   Nov 1 2005, 06:53 AM
- - BudmannG   QUOTE (ncgalant @ Nov 1 2005, 07:53 AM)Looks ...   Nov 1 2005, 07:11 AM
- - black92_tsi_awd   I think ncgalant post was for turbocar. Budmann...   Nov 1 2005, 07:20 AM
- - BudmannG   I set the pressure at 37 psi when I was at Nates. ...   Nov 1 2005, 08:05 AM
- - turbohcar   Sorry, didn't mean to steal your post Budmann....   Nov 1 2005, 08:13 AM
- - BudmannG   No stealing done here it was for everyone. If it h...   Nov 1 2005, 08:30 AM
- - natedogg   QUOTE (turbohcar @ Oct 31 2005, 06:48 PM)Well...   Nov 1 2005, 09:55 AM
- - ncgalant   sorry about that, yes my post was for turbohcar. ...   Nov 1 2005, 01:26 PM
- - turbohcar   Now, I've got a MAS Translator that I can put ...   Nov 1 2005, 06:34 PM
- - black92_tsi_awd   Fuel cut should show up as an open throttle, no in...   Nov 1 2005, 07:50 PM
- - turbohcar   I'll have to do a log of airflow but there are...   Nov 1 2005, 08:38 PM
- - JMoushon   QUOTE (turbohcar @ Nov 1 2005, 08:38 PM)I...   Nov 1 2005, 08:48 PM
- - turbohcar   This isn't gentle either. I meant to relate i...   Nov 1 2005, 09:02 PM
- - black92_tsi_awd   If your getting 0.0ms of injector pulse and it mat...   Nov 1 2005, 10:06 PM
- - natedogg   You can also tune around fuel cut by using the tra...   Nov 2 2005, 07:36 AM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 24th June 2026 - 12:01 PM
Design by: IPB Download & eBusiness Discussions