Welcome Guest ( Log In | Register )

> 90 trans into a 92 question
jvb6806
post Jul 6 2006, 04:34 PM
Post #1


DSMCentral Freak
****

Group: Members
Posts: 257
Joined: 21-July 04
From: Normal
Member No.: 351



first things first...


secondly...

i am picking up a 90 trans and transfercase to put in my DSM this weekend. my concern is the difference in the shifter assemblies. i know that the shifter is different in the 90's as well as the linkage, the mounting bracket, and the assembly on the trans.

my question is if i use the 92 linkage cable bracket (the one that is mounted on the trans) will that allow me to have all of my gears? or do i have to pull the shifter assembly out of the 90 trans and put in the assembly from my 92?

from what i understand if i put the trans in AS IS i will not be able to reach 1-2 or 5-R (i can't remember which one it is)

any input would be appreciated.

thanks.


--------------------
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
wortdog
post Jul 7 2006, 12:35 AM
Post #2


Post Master
*****

Group: Members
Posts: 626
Joined: 25-September 02
From: Urbana, IL
Member No.: 19



I've put 2 90 transmissions into 2 92's, if you just swap the bolt-on part of the shift levers you end up with a really nice, short shift feel, assuming the 90 trans is in good shape at all. You can overtravel and break forks if you're hamfisted with the shifter.

Never had any problems with the axles.


--------------------
Eric Wort
87 White Buick Turbo 'T' (11.71 @ 116.5, 1.61 60ft, slipping trans)
92 Teal Eagle Talon TSi AWD (burn victim)
Go to the top of the page
 
+Quote Post

Posts in this topic


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 25th September 2026 - 05:40 AM
Design by: IPB Download & eBusiness Discussions