![]() |
![]() |
![]()
Post
#1
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,108 Joined: 2-October 05 From: Waverly, Illinois Member No.: 636 ![]() |
![]() ![]() I was going down this country road about 55mph. Coming up on a hill and top it. At the top of the hill it turns into gravel.And there is a S10 in the middle of the road. He don't fucking move! ![]() Well it didn't start the first 5 minutes I tried. I even had enough time to go into DSM Link and activate the fuel pump. Still didn't work, So it was time to get out of the car. I didn't even look at the damage. I just went straight to where the battery was supposed to be. The battery was in the spare tire area when I looked. I picked up the battery and put it back. I noticed that it riped the fuel pump wire off. I did a quick twist on the wires and closed the deck lid. Went back up and she started on the first try. So then I drove it home and then looked at the damage. Now while all that was going on! The guy in the S10 doesn't even turn around to see if I am ok. Didn't stop ask if I need help or anything. CAN YOU FUCKING BELIEVE THAT? This **** runs me off the road and then doesn't even stop. All I know is I was trying to save my car. Well I failed misserably at it. I tore of the passenger mirror with what I think was a tree. The drivers side rear bumper was ripped out also with what I think was a tree. The passengers side of the car got the worst of everything. I haven't raised the hood to see if I fucked anything up under there. The passenger side rear quarter panel is all smoothed down by the tree also. The rear bumper is fucked beyond repair. Now I have a car that is going to need a shit load of repairs to the body. Hell I don't even know if the thing runs straight down the road anymore. ![]() I will post pics up later of the damage! -------------------- |
|
|
![]() |
![]()
Post
#2
|
|
Info Seeker ![]() ![]() Group: Posts: 75 Joined: 24-January 06 Member No.: 786 ![]() |
i would just cut out what you need. i would not cut it with a plasma. use a grinder or those sheet metal nibblers. when you weld it back together have a bucket of cold water and a rag. only weld about a 1/2 inch at a time and cool it with the rag. alot of heat on that thin of metal and it will oil can like crazy. and when you grind down the weld cool that as well
|
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 10th October 2025 - 05:54 AM |