Jul 24 2006, 02:14 PM
Post
#1
|
|
|
HONDA KILLER ![]() Group: Members Posts: 11 Joined: 5-July 06 Member No.: 947 |
i'm running dsmlink with a 2.3L stage 5 head with 272 cams and 1000cc injectors 255 fuel pump and e85 at fuel, at only 15psi i'm still getting knock around 5500-6500 i'm already running a colder spark plug, its gapped at 29, and my a/f ratio is around 10.2-10.6, does anyone have any tips and ideas on how to eliminate my knock its only 1 - 4 degrees of knock but i shouldn't be getting any at all, please help
- junkyardtalon |
|
|
|
![]() |
Jul 24 2006, 02:41 PM
Post
#2
|
|
|
HONDA KILLER ![]() Group: Members Posts: 11 Joined: 5-July 06 Member No.: 947 |
my base timing is 5 degrees and in dsmlink we have it around 16-18 degrees but whenever i knock it drops it down, we've pulled timing out a few degrees in the higher end and it still knocks, i have about 4 dregrees pulled out between 4500-6500
|
|
|
|
junkyardtalon Knocking problems with dsmlink Jul 24 2006, 02:14 PM
ncgalant What is your timing advance at that point? Starti... Jul 24 2006, 02:29 PM
wortdog If you're actually running E85, you're too... Jul 24 2006, 03:07 PM
Hult250R QUOTE (wortdog @ Jul 24 2006, 03:07 PM)If you... Jul 24 2006, 06:03 PM
scorp28 QUOTE (Hult250R @ Jul 24 2006, 07:03 PM)ya...... Jul 25 2006, 12:41 AM
junkyardtalon yeah i did the conversion, ok i've been told s... Jul 25 2006, 11:13 AM
junkyardtalon ok well forget the last question, i did some resea... Jul 25 2006, 11:25 AM
AWD DSM 1 wortdog knows his stuff... Jul 25 2006, 11:40 AM
junkyardtalon i'm guessing there for either cuase the websit... Jul 25 2006, 12:19 PM
wortdog You need a lot of pump and injector to run E85, a ... Jul 25 2006, 02:55 PM
junkyardtalon the 350 hp was just an estimate on pump gas, with ... Jul 25 2006, 03:37 PM
wortdog The Wiseco 2.3 stroker pistons are only 8.8:1, you... Jul 25 2006, 04:13 PM![]() ![]() |
| Lo-Fi Version | Time is now: 22nd September 2026 - 03:06 AM |