Apr 9 2007, 07:11 AM
Post
#1
|
|
![]() Post Master ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 864 Joined: 12-July 05 From: Illinois Member No.: 556 |
Ok guys, the whole reason i bought the new setup is because my BR580 took a crap and the stock turbo i had on the car was blowing oil into my intake making my car smoke like crazy.
Now the new problem: I got into it a little bit this morning and the bitch still smoked! Im not sure if it is just from the oil left in the intake pipes and exhaust or what the problem is. I thought the problem was the stock turbo i had blowing oil into the intake and it burning up and smoking but im stomped. Now the weird part, it only does this when you hold the boost for a few thousand RPM's. If I just hit it and then shift quickly it doesnt smoke at all, but if i stay in the gear for a bit it rolls out. Also, the car does not smoke at all at idle. can you guys give me some ideas as to how i can solve this problem? last time i checked my compression it was 164 across the board. please and thanks!!! TJ -------------------- "One of the most Crazy and Undecisive Members in central Illinois"
|
|
|
|
![]() |
Apr 12 2007, 07:05 PM
Post
#2
|
|
![]() Post Master ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 864 Joined: 12-July 05 From: Illinois Member No.: 556 |
ok guys, now i have a question about how to hook the ex. wastegate vac. lines up! I have them hooked up as follows:
1st. nipple on waste gate= line, t'd into the boost controller and then to the j pipe 2nd nipple on waste gate comes from opposite side of boost controller now the problem is, when both nipples are hooked up, the car goes to 20+ psi and i cant get it to go down, and the waste gate doesnt open up. When the 2nd nipple is unhooked, it stays at 10 pounds and the waste gate opens up. what the heck is my problem? -------------------- "One of the most Crazy and Undecisive Members in central Illinois"
|
|
|
|
treydawgs4g63T smoking problem, how to solve Apr 9 2007, 07:11 AM
natedogg What color is the smoke? If its blue, I'd say... Apr 9 2007, 08:18 AM
treydawgs4g63T well i figured it was probably just oil left in th... Apr 9 2007, 07:47 PM
black92_tsi_awd My exhaust is still burning a little oil since my ... Apr 9 2007, 08:44 PM
treydawgs4g63T ok guys, im pretty sure i found the problem. Toda... Apr 11 2007, 08:24 AM
natedogg Sounds like your on the right track removing that ... Apr 11 2007, 10:37 AM
The Iron Goat Sounds like you have the boost controller hooked u... Apr 13 2007, 06:41 AM
treydawgs4g63T ok guys, i cant figure it out so someone please ex... Apr 17 2007, 08:28 PM
asiankid91 first u need to get those 650 in!!!... Apr 17 2007, 09:29 PM
treydawgs4g63T yeah, but i still dont wanna run 27+ psi....... Apr 18 2007, 07:00 AM
black92_tsi_awd Does this help HOOKUP Apr 18 2007, 08:35 AM
turbohcar QUOTE (black92_tsi_awd @ Apr 18 2007, 08:35 A... Apr 18 2007, 05:01 PM
treydawgs4g63T i know how to hook up the stock setup, thanks guys... Apr 18 2007, 07:21 PM
natedogg While I've never used an external WG myself I... Apr 19 2007, 07:17 AM
treydawgs4g63T that sounds like a good idea, so ill will try it. ... Apr 19 2007, 07:43 AM
mitsu90 go to page 6 Apr 19 2007, 08:21 AM
black92_tsi_awd Here's the setup for a Tial Diagram Apr 20 2007, 11:18 AM![]() ![]() |
| Lo-Fi Version | Time is now: 23rd September 2026 - 05:12 AM |