Blowing fuses Options

[winkler1g]

I have no idea were the problem is, so I was hoping some of you guys would have some insite. My gauge cluster is not lighting up and the tail lights are also out. I keep on blowing 10amp tail light fuses under the hood. My tail lights still light up when I hit the brakes or use my turn signals. I put a 30amp fuse in and the cluster and the tail lights lit up just a little bit. I can not find any other blown fuses or grounded exposes wires so I have no idea if it is something incredible simple but who knows.

[winkler1g]

I replaced both the turn signals. I mean I replaced everything not justthe bulbs I replaced the sockets and the plugs. They both work great now. I even went over all the wireing I have done and checked it all and even changed a couple things. After all that the running lights worked great just as gright as before. I had them working awsome for almost two hours. I was on my way to pekin when I got on it I hit fuel cut and the fuses started blowing again. That is exactly how it started the first time. So I am yet stumped again. One person thinks it might be my alternator. It ispushing about 14.5 volts and he thinks when I fuel cut I volt surge. Another person thinks its the switch. And another thinks its the ecu. I will be happy to accept any insight on the situation, b/c my nerves are about shot with with stupid problem.