Welcome Guest ( Log In | Register )

> need help, temp issue
cjk123
post Jun 7 2009, 05:34 PM
Post #1


Person of Wisdom
***

Group: Members
Posts: 151
Joined: 16-March 04
From: Jacksonville and Champaign IL
Member No.: 260



Alright I am completely stumped and need some help. So my car has started to overheat. My radiator fan won't kick on no matter how hot it gets. Now if i turn my a/c on, both fans will turn on, but that is the only way I can get either fan to turn on. Without them both on of course the car begins to overheat very quickly.
Now here is everything I have replaced trying to fix the problem, some of them were done before this issue even started, but it had always ran slightly hot and sometimes would begin to overheat but if i pulled over, turned the car off and then back on, everything was fine. But all replacements have been in the last week and the issue started two days ago.
1. 160 degree thermostat (never used anything other than the stock 192 before and wondering if this could be involved somehow??)
2. Temperature sending unit also called the temperature switch
3. Coolant Temperature Sensor
4. Cooling fan switch (both on the thermostat housing and the bottom of the radiator, the bottom of the radiator one I think is called like the thermo temp switch or something like that, but I was told they're the same sensor so I replaced both of them)
5. The radiator fan relay

Yet for some reason the fans will only kick on if a/c is on and even then it seems to run slightly hot. I have been looking and cannot see any leaking from my water pump.

I really really need some help on this one because I cannot figure it out for the life of me and I obviously cannot keep driving my car while its running hot.


--------------------
Hopefully getting back into things w/ a 90 laser rs-t
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
dualdj1
post Jun 10 2009, 01:16 PM
Post #2


DSMCentral Freak
****

Group: Admin
Posts: 490
Joined: 15-September 08
From: East Peoria, IL
Member No.: 8,716



Well you're coolant won't be hot to the touch until the thermostat opens (generally). Temp sensor measures temp directly in the block before the thermostat. If the gauge shows cold before starting first thing, then it shouldn't be grounding out. May have a thermostat stuck closed. Turn your heater on to hot when the temp gauge says it's at temp. if you're heater is hot, and the antifreeze at the cap is still cold, I'd change therm. Still might not fix your fan prob though.


--------------------
1978 Mustang II King Cobra
89 5.0HO, Stock Short Block, Ford F303 cam, 1.7:1 Crane Roller Rockers, Holley 650 Doubler Pumper, MSD 6AL, Pocket Ported stock heads, Hedman Long Tube Headers
5 spd Manual
Full roll cage, 9" full floater w/Currie trac lock/373 gears, RCI Fuel Cell
Project Page: http://www.brandttuning.com/projects.htm
Go to the top of the page
 
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 6th August 2026 - 01:55 PM
Design by: IPB Download & eBusiness Discussions