 Project Black Golfball-plans for 2010 |
 Mar 8 2010, 05:27 PM
Post
#1
|
|
 Eats and sleeps DSM jargin.  Group: Members Posts: 1,995 Joined: 27-November 04 From: Yates City IL Member No.: 389  |
Finally got back to working on the Talon Sat.
After I put in the replacement trans, I developed a leak and parked the car again due to the weather. I thought it was the transfer case seal so I pulled it out. Transfer Case was full of oil, so that wasn't it. The inside on the trans housing was all wet when I pulled the clutch fork boot off so apparently one of the trans seals is leaking. Looks like the output shaft for the transfer case may be the culprit. It seems to be seaping just sitting in the driveway. Thing is, why would it be wet up by the clutch fork?? The input shaft seal shouldn't be leaking that much because it's above the oil line in the trans, at least I think so. I hope it's not the input shaft seal, I'd have to disaasemble the trans to replace that. I did remove the inoperable cruise control since I picked up a no-cruise cable over the winter. Need to finish hooking that stuff up. -------------------- 92 Eagle Talon TSI AWD "The Black Golfball" How fast can a 14B go???
91 Chevy C1500 "Problem Child" **SOLD** 01 Impala DD 07 Trailblazer Wife's new DD Cars run on blood, sweat, and horsepower... Without the first two, you can't get the last" SOB Racing "Sitting On Blocks" |
 |
 
|
 |
Replies
|
Oct 1 2010, 06:26 PM
Post
#2
|
|
|
Eats and sleeps DSM jargin. Group: Members Posts: 1,995 Joined: 27-November 04 From: Yates City IL Member No.: 389 |
The race trans started grinding 4th gear so out it came...
I rebuilt the grenaded trans and swapped it for the race trans today today. Shifts pretty good and should get me back to the track soon. Guess I'll bust the case open on the race trans and look at 4th gear hub and syncros. -------------------- 92 Eagle Talon TSI AWD "The Black Golfball" How fast can a 14B go???
91 Chevy C1500 "Problem Child" **SOLD** 01 Impala DD 07 Trailblazer Wife's new DD Cars run on blood, sweat, and horsepower... Without the first two, you can't get the last" SOB Racing "Sitting On Blocks" |
|
|
|
|
Oct 1 2010, 11:16 PM
Post
#3
|
|
|
DSMCentral Godfather Group: Admin Posts: 3,823 Joined: 10-January 01 From: Washburn Member No.: 26 |
QUOTE (black92_tsi_awd @ Oct 2 2010, 12:26 AM)  The race trans started grinding 4th gear so out it came... I rebuilt the grenaded trans and swapped it for the race trans today today. Shifts pretty good and should get me back to the track soon. Guess I'll bust the case open on the race trans and look at 4th gear hub and syncros. Keeping the dream alive... -------------------- In Loving memory of David T Crebo
Greatness comes from the most unexpected places!  |
|
|
|
Posts in this topic
black92_tsi_awd Project Black Golfball-plans for 2010 Mar 8 2010, 05:27 PM
black92_tsi_awd Ordered another ACT 2600 pressure plate. Need to ... Mar 15 2010, 06:16 PM black92_tsi_awd Got my new pressure plate and got the trans pulled... Mar 25 2010, 10:39 AM black92_tsi_awd Little catch can I welded up to replace the bulky ... Mar 29 2010, 08:30 AM Kyle d32a QUOTE (black92_tsi_awd @ Mar 29 2010, 09... Mar 29 2010, 11:55 AM dualdj1 you could probly just use some paint/primer and sw... Mar 29 2010, 12:33 PM black92_tsi_awd I intially thought fuel tank sealer...but figured ... Mar 29 2010, 06:47 PM dualdj1 if you're going to make a new one before too l... Mar 30 2010, 08:32 AM black92_tsi_awd You don't know me very well...
This will pro... Mar 30 2010, 01:42 PM black92_tsi_awd Took my flywheel into Kalina to get it resurfaced.... Mar 31 2010, 06:23 PM black92_tsi_awd Took the day off of work and worked on the Talon a... Apr 1 2010, 08:58 PM dualdj1 that's pretty crazy that they couldn't get... Apr 2 2010, 07:40 AM black92_tsi_awd I found a Fidanza 8lb AL flywheel for $85 unu... Apr 3 2010, 08:26 PM awd4kicks Mine is an oldschool Fidanza like the one that Dar... Apr 4 2010, 07:58 PM black92_tsi_awd Well, I guess I didn't notice any differance w... Apr 5 2010, 08:48 AM Patterson353 Yea i agree. Mine used to want to die but it got t... Apr 5 2010, 08:26 PM black92_tsi_awd NCgalant I assume! Apr 5 2010, 08:40 PM Patterson353 Yes Sir Apr 5 2010, 08:58 PM black92_tsi_awd Got my Fidanza flywheel today! Looks pretty g... Apr 8 2010, 07:42 PM black92_tsi_awd Never going to Kalina again! I asked them to ... Apr 9 2010, 07:27 PM black92_tsi_awd Well spent 7 hours getting everything together...n... Apr 10 2010, 07:31 PM Dan Boles Chris, I have not read the whole thread..
A coupl... Apr 16 2010, 09:56 AM black92_tsi_awd Trans shifts fine without the car running.
I repl... Apr 16 2010, 10:49 AM black92_tsi_awd Got everything back together...damn thing still wo... Apr 21 2010, 08:37 PM dualdj1 It's something in your clutch system. Your cl... Apr 22 2010, 10:27 AM black92_tsi_awd Well I had Brent check the movement of the clutch ... Apr 22 2010, 07:34 PM black92_tsi_awd Replaced the master and slave...Still only have 3/... Apr 26 2010, 05:05 PM dualdj1 man, that's a strange problem.
Will it hurt... Apr 27 2010, 10:59 AM black92_tsi_awd naw...preload cause TOB failures.
I'll pull o... Apr 27 2010, 12:41 PM dualdj1 yeah kinda what i thought, tough luck Apr 27 2010, 01:08 PM natedogg The wearing clutch pedal is actually a fairly comm... Apr 27 2010, 01:08 PM black92_tsi_awd steering column is out, everything disconnected. ... Apr 27 2010, 07:55 PM black92_tsi_awd Got everything out yesterday. By looking at the j... Apr 29 2010, 02:06 PM dualdj1 it really sounds like you're on the right trac... Apr 30 2010, 08:36 AM black92_tsi_awd JNZ Tuning let me down for the first time. Order ... May 7 2010, 08:14 PM black92_tsi_awd Well I'm about at the end of my rope. I repla... May 17 2010, 08:04 PM
awd4kicks QUOTE (black92_tsi_awd @ May 18 2010, 02... May 17 2010, 09:34 PM black92_tsi_awd Kicks,
Let me know if your game gets canceled toda... May 18 2010, 06:43 AM black92_tsi_awd I got the Talon running! I found this video l... May 22 2010, 03:45 PM awd4kicks Congrats Chris! See you at the track June 6th... May 25 2010, 08:21 PM black92_tsi_awd Well maybe...
Pass side axle started leaking Sund... May 25 2010, 08:28 PM dualdj1 QUOTE (black92_tsi_awd @ May 25 2010, 09... May 26 2010, 07:58 AM black92_tsi_awd Looks like I solved the problem (finger crossed).
... May 26 2010, 09:19 PM dualdj1 sweet, glad to hear it's finally coming togeth... May 27 2010, 07:20 AM black92_tsi_awd and she's down again.
something in the trans ... May 27 2010, 07:34 PM black92_tsi_awd Got the gears sets rebuilted after eating a couple... Jul 11 2010, 01:31 PM black92_tsi_awd Took the Talon out to check the launch rpm on the ... Jul 26 2010, 07:53 PM dualdj1 damn man, You just can't keep that thing toge... Jul 27 2010, 07:55 AM black92_tsi_awd Well here's a picture of the burnout and a cou... Aug 24 2010, 07:21 PM black92_tsi_awd I did manage to get it to the CSS Street Car Chall... Aug 24 2010, 07:25 PM dualdj1 lol sooner or later you'll have replaced every... Aug 25 2010, 12:35 PM black92_tsi_awd QUOTE (awd4kicks @ Oct 2 2010, 12:16 AM) ... Oct 2 2010, 08:12 AM black92_tsi_awd Went to the track last Friday, didn't do too b... Oct 13 2010, 06:36 PM dualdj1 nice work, looks like a good solid setup. Oct 15 2010, 09:02 AM awd4kicks Good job Chris! Oct 16 2010, 11:16 AM black92_tsi_awd Carrier bearing was getting a little sloppy so I r... Oct 16 2010, 12:06 PM mitsu90 Stick a heat lamp on it or maybe even a 100 watt b... Oct 16 2010, 01:50 PM black92_tsi_awd I survived Vicary Day!!
Car had wheel hop... Oct 17 2010, 07:00 PM mitsu90 Nice times.. You finally giving up on the 14b Oct 18 2010, 12:07 AM black92_tsi_awd Quite possibly...
I've been beating this 14B ... Oct 18 2010, 09:14 AM dualdj1 yeah major weight reduction is not worth doing on ... Oct 18 2010, 09:29 AM mitsu90 What turbo you looking at using? Oct 18 2010, 03:06 PM black92_tsi_awd Probably a 16g, easiest trip to the 11's. But... Oct 18 2010, 03:39 PM mitsu90 I'll keep a look out for one Oct 19 2010, 03:34 PM black92_tsi_awd Anybody know anyone that has run the Dsmap tuning ... Oct 30 2010, 01:34 PM mitsu90 93dsmowner is running speed density. He seems to k... Oct 30 2010, 02:50 PM 93dsmowner QUOTE (black92_tsi_awd @ Oct 30 2010, 02... Oct 31 2010, 03:18 PM black92_tsi_awd I joined up on there this week. Need to get my fi... Oct 31 2010, 06:54 PM 93dsmowner QUOTE (black92_tsi_awd @ Oct 31 2010, 07... Nov 1 2010, 09:06 PM dualdj1 hey I'm lookin for something good to help patt... Nov 2 2010, 02:08 PM 93dsmowner QUOTE (dualdj1 @ Nov 2 2010, 03:08 PM) he... Nov 2 2010, 10:43 PM dualdj1 Please don't take this wrong, I am generally i... Nov 3 2010, 08:49 AM 93dsmowner QUOTE (dualdj1 @ Nov 3 2010, 09:49 AM) Pl... Nov 3 2010, 01:11 PM black92_tsi_awd I don't understand the "you'd have to... Nov 3 2010, 02:10 PM 93dsmowner QUOTE (black92_tsi_awd @ Nov 3 2010, 03:1... Nov 3 2010, 10:43 PM dualdj1 "The way I see it, MAF is best on NA cars but... Nov 4 2010, 11:00 AM black92_tsi_awd Headed out for the FBody Track rental day today.
... Nov 6 2010, 05:12 PM awd4kicks Simply AMAZING Chris! You just keep getting b... Nov 7 2010, 08:24 PM black92_tsi_awd Thanks.
I was actually doing the happy dance when... Nov 7 2010, 08:31 PM 93dsmowner Wow Chris...
That's incredible. I'll be h... Nov 7 2010, 09:40 PM dualdj1 Congrats, awesome job!
I could see a stang be... Nov 8 2010, 12:35 PM black92_tsi_awd Worked on my hacked intake manifold tonight. I fo... Nov 12 2010, 09:03 PM 93dsmowner QUOTE (black92_tsi_awd @ Nov 12 2010, 09... Nov 14 2010, 01:25 AM awd4kicks Pictures... Nov 13 2010, 11:54 AM black92_tsi_awd Cutting Al with a router right now... Nov 13 2010, 12:57 PM black92_tsi_awd 93dsmowner
Thanks for the offer. Working on gathe... Nov 16 2010, 05:43 PM black92_tsi_awd Pictures of my Redneck Bridgeport Nov 16 2010, 05:47 PM dualdj1 can you use a GM 3 bar sensor? My understanding i... Nov 17 2010, 09:02 AM 93dsmowner QUOTE (black92_tsi_awd @ Nov 16 2010, 05... Nov 17 2010, 12:02 PM dualdj1 sorry should've quoted, was responding to blac... Nov 17 2010, 12:54 PM black92_tsi_awd Put the Talon in the ditch Monday and ran over a ... Dec 15 2010, 07:14 PM mitsu90 Glad your ok. The car can be fixed.. Dec 15 2010, 09:05 PM black92_tsi_awd It was a sloooowwww speed crash. Pretty stupid of... Dec 19 2010, 07:21 PM Patterson353 let me know if you need parts Dec 19 2010, 09:17 PM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 8th October 2025 - 07:20 AM |
Powered By IP.Board
© 2025 IPS, Inc.