 Forced Performance Turbos |
  |
 Oct 7 2005, 09:55 AM
Post
#1
|
|
|
DSMCentral Godfather  Group: Admin Posts: 3,823 Joined: 10-January 01 From: Washburn Member No.: 26  |
I'm incredibly impressed with my first impressions of Forced Performances FP3052 (Garrett 3076 with FP turbine housing) turbo. I know that most turbos will do the basic job they are designed for. I am assuming that the Forced Performance Garret will live up to it's design as well.
The look and quality of this turbo by far surpasses any turbo I have had before. I didn't even spend the extra money to get anything polished and the finish on everything has a classic and clean look. The Garrett compressor cover looks like virgin bare aluminum of corse. The custom made Forced Performance stainless steel turbine housing looks awesome! Both the waste gate and O2 housing conection are v-band clamp style and the discoloration from the welding makes for a golden almost trophy like appearance. The Tial 44mm WG is just as nice! With the whole assembly mocked up on the engine stand, it makes me think of an artizans steam fitting project from the industrial age, or a stage prop from the old time machine movie. VERY Classy. Once I get the engine passed the break-in period (Lord willing) I'll let you all know if it pumps as well as it looks. Marcus -------------------- In Loving memory of David T Crebo
Greatness comes from the most unexpected places!  |
 |
 
|
|
Oct 7 2005, 10:03 AM
Post
#2
|
|
 Zen Master DSM Group: Moderators Posts: 3,008 Joined: 10-January 01 From: in front of you Member No.: 5 |
 Pics?
|
|
|
|
|
Oct 7 2005, 10:07 AM
Post
#3
|
|
|
DSMCentral Godfather Group: Admin Posts: 3,823 Joined: 10-January 01 From: Washburn Member No.: 26 |
No pictures at this time...
Right now I'm just amazed at the diminutive size of this turbo for the HP rating it has. It is a larger turbo by DSM standards, don't get me wrong, but the turbine side barely looks any bigger than a 14b! For comparrison purposes, my old BR500 placed the oil return line over the edge of the front motor mount. This turbo with the FP cast turbine housing puts the oil return line about an inch inboard of the front motor mount...No clearance issues! -------------------- In Loving memory of David T Crebo
Greatness comes from the most unexpected places! |
|
|
|
|
Oct 7 2005, 10:38 AM
Post
#4
|
|
|
Zen Master DSM Group: Moderators Posts: 3,008 Joined: 10-January 01 From: in front of you Member No.: 5 |
I think part of that might also be due to the fact that the BB center cartridge is smaller than the standard Garret 360 race bearing cartridge in the BR500. I noticed the same thing when I started installing my GT35R.
|
|
|
|
|
Oct 7 2005, 02:34 PM
Post
#5
|
|
|
DSMCentral Godfather Group: Admin Posts: 3,823 Joined: 10-January 01 From: Washburn Member No.: 26 |
Good point Natedogg. Now that you mention it, the electrical tape covering the oil and coolant holes nearly covers the whole center section.
-------------------- In Loving memory of David T Crebo
Greatness comes from the most unexpected places! |
|
|
|
|
Oct 7 2005, 02:45 PM
Post
#6
|
|
 Post Master Group: Members Posts: 729 Joined: 19-September 02 From: New Baden, IL Member No.: 7 |
Hey,
Don't forget what I mentioned at the bookout: to change out that oil return line to something else, unless you cleaned the hell out of it. Don't want that one to get F***ed up like the BR500. -------------------- -The original (member) 007. Stop looking at me Spy!!
-98 S-10 P/U creepin' low on stock 15s!! -You come off just a little more intelligent if you know how to spell the insults in addition to saying them |
|
|
|
|
Oct 7 2005, 03:14 PM
Post
#7
|
|
|
DSMCentral Godfather Group: Admin Posts: 3,823 Joined: 10-January 01 From: Washburn Member No.: 26 |
Yep good call JBone. I plan on using a new hose and cleaning the fitting like you suggested.
-------------------- In Loving memory of David T Crebo
Greatness comes from the most unexpected places! |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 29th April 2026 - 02:35 PM |
Powered By IP.Board
© 2026 IPS, Inc.