 important ? for my rebuild, 6/7 bolt block |
  |
 Nov 21 2005, 08:15 PM
Post
#1
|
|
 Post Master  Group: Members Posts: 864 Joined: 12-July 05 From: Illinois Member No.: 556  |
Are the blocks for the six bolt and the seven bolt the same. I need to know because i have a 2g that I am going to put a six bolt motor in. I have an extra 2g block laying around and was wondering if the blocks were the same. If so I am going to order a rebuild kit with a .20 over bore for a 1g and use that block. Any help will be greatly appreciated.
Thanks -------------------- "One of the most Crazy and Undecisive Members in central Illinois"
|
 |
 
|
|
Nov 21 2005, 09:00 PM
Post
#2
|
|
|
DSM Tech Wizard Group: Members Posts: 2,256 Joined: 10-January 01 From: central IL Member No.: 10 |
Blocks are NOT the same. You will have to find a 90-92.5 block.
-------------------- The fastest car I own is a minivan....
|
|
|
|
|
Nov 21 2005, 09:46 PM
Post
#3
|
|
|
Web Administrator Yo! Group: Admin Posts: 516 Joined: 30-August 04 From: Mackinaw, IL Member No.: 376 |
I am sure there is a lot of documentation out there on the swap but Magnus seems to have a pretty good list of what is required for the 6-bolt swap. Check out the parts list about half way down the page in this link...
Magnus Motorsports -------------------- Fast & Furious on the outside...DSM under the hood!!!
|
|
|
|
|
Nov 26 2005, 01:22 PM
Post
#4
|
|
 Beginner Group: Members Posts: 37 Joined: 8-November 05 From: Cuba, Missouri Member No.: 697 |
I'm taking my 7 bolt from my 2g up to speed design next week to have them do a "crank walk fix" after researching putting a 6 bolt in a 2g i decided to use a 7bolt. i talk to a lot of ppl who had nothing but problems... and especially my application my 2g will only see about 300 whp, and they race with their 7 bolt that had the fix and theres been no problems
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 16th March 2026 - 04:22 PM |
Powered By IP.Board
© 2026 IPS, Inc.