Update: Spring 2006 Options

[turbohcar]

In an effort to repel those itchy keyboard finger posts, lets talk about something constructive. What are your plans in 2006? what are your goals? with which car? and what are doing to get there right now?




Me? I'm working on the Talon again. I took it apart again in late December. You would think that after three years of working on it without driving it would make a guy go crazy, NO. You ask why I took it apart? To make it faster. Man cannot live on just a basically stock car alone. Therefore, plans are in the making to build something different. This something different will be based around the stock motor, until it blows up (knock on wood). Goals include making a street worthy track monster that will run quicker than the average bear on the stock turbocharger (for now).

Right now, I'm not doing anything. I am however, going broke on go-fast parts. These parts include but aren't limited to:

Eprom ECU
GM MAFT
fuel tank-to-filter line
Hi-flow fuel filter
Full Throttle AFPR
3in turboback exhaust
2.5in intercooler pipes
Supra SMIC
780cc injectors

and some misc. maintenance mods.

How about you?

[AWD DSM 1]

Trying to sell the vr-4 off, then hope to find a clean 92 AWD to tear up the streets... or maybe park in the garage for the next 3 years (if I keep it that long).

Seriously though, I'd like to build up a nice 11 sec 16g car that can handle some twistys... ambitious, probably.

[black92_tsi_awd]

Turbo, I don't think that's enough to beat me....

But I shouldn't taunt with my engine OUT of the car right now!!

Our plans seem very similiar. I'm going to go with getting a bigger inlet/outlet on the SMIC and maybe 550 injectors.

[turbohcar]

Believe me Black, I'm leaving out several select ingredients to my mixture that will definitely help me overtake your car.

[The Iron Goat]

Believe me Black, I'm leaving out several select ingredients to my mixture that will definitely help me overtake your car.

Absolutely. There have to be a FEW secrets in the mix. I'm going the same route Brett is with the Goat-o sled. It's in the garage, on stands, disassembled.

Plans are ripping out all the sound deadening, unnecessary parts, brackets and the like.
A fiberglass center console will be fabbed housing various switches and knobs that control some things that I don't care to mention.
New paint all around in addition to the very minor body work required.
Suspension upgraded.
Bigger turbo
Injectors in the 700 range.
Engine pulled, bay cleaned and repainted and refurbed.
Repair of wiring harness hack job done by a wannabe electric tech
Custom guage pod
ACT 2900
Fidanza Flywheel
Racing seats????

Having said all my plans for '06, it's important to note that they may only be completed by Dec '06!! I'll do my best to get this thing to the track, but until I get a little more time and cash, it's anyone's guess.

[ncgalant]

By May I want to.....

Have the laser running in good stock form. 1g MAS, 450cc injectors, 15psi

The galant should be sporting

a reringed engine w/o BS
ported 14b or evo16g(depending on funding)
my big FMIC
EVO3 Exhaust manifold/O2 housing to a full 3" exhaust
tuned EPROM ECU
510cc injectors at 48psi
2g MAS

My goal is a solid 12 second galant at full weight.

[MidwestDSM]

Ummm....my DSM runs, and my plans for 2006 are to keep it running.

[awdnot2]

The car is going under the knife. We're going to fix her chest(hood) up. Some skin graphs (paint), a heart transplant(GT type turbo), lipo-suction(plasma cutter) and add some more safety features(cage update). It may be done in the next 2 months.

[black92_tsi_awd]

Believe me Black, I'm leaving out several select ingredients to my mixture that will definitely help me overtake your car.

Hmmmm....we'll have to see, I like a challange!

Don't worry, I got a few things up my sleeve too. And it looks like in a couple months, the Talon won't be my daily driver anymore, so I've got more options for speed now!


Hey Goat, leave the paint for later. It'll get you to the track sooner!

[Taxiwardance]

Plans for the Talon. Get everything together and running. Stock internal 2.0 to get it back on its feet. But by late 2006 it should be sporting a new built 6 bolt stroker with large turbo and front mount IC. Many details to come in warmer months and should be making its debut at Cordova soon.

But now I have a 92 Laser FWD turbo that is screaming for attention. So I am going to strip cut and remove everything on this car that has little to no purpose (AC, interior, sound deadening material, everything from the wiper motor to the radio wiring and bumpers to door and body reinforcement material) keeping the motor stock and 14b in place. This ugly little teal monster is going to be my budget racer once I finish the Talon. My go cart on crack with no safety in sight, hell I would pull the driver seat and put in a milk crate for the seat if I could.

[JBone]

Plans for me include dropping the dime (that's s10 for you who don't know) at least 5 inches all around, making it almost impossible for a 12oz "soda" can to fit between the ground and frame rails. OH YEAH!!! I would also like to get some new wheels and tires for the new look. I love the 16" wheels that came on the pre extreme zq8 s10s, but now I think I need to go with at least 17"s for the drop.

Plans for my DSM:
None, I ain't got one bitches!!!!

It's almost awkward not hearing about any problems with this or that when a mechanic changes the oil. I am usually stunned.

[mitsu90]

my plan is to get the GVR4 to run 12.99 or better.

mods
3" turbo back
frank jr.
550's
eprom set for 550's 8k rev
SAFC

would like to get a good frount mount for it.

my plan for the AWD TSI..... to make it drivable it's need a timming belt badly.

[Hult250R]

building my extra block and head so I can still drive the car with the "stock" block thats in it.

Ross Pistons .020 over
Eagle Rods
new front cover/oil pump
ARP everywhere
new bearings/misc.

Head:
JAM valve springs
SS valves
Bronze Guides
FFWDConnection.com L2 cams
mild "clean-up" port work

All this should be done sometime Late summer early next fall.
Im planning on putting the motor in the car sometime then.
Im taking my time as far as buying parts so I dont break the bank.
I just ordered pistons and rods last week, the build-up begins Lol

[99Spyder]

I hope to have the engine back in the car and running by April. Who wants a piece of the overweight A/T?

-Injen Cold Air Intake
-Greddy Type-S BOV
-Greddy IC Piping all around
-FP Ported Big16G
-Ported O2 Housing
-Ported EVO III Exhaust Mani
-APEXi N1 Downpipe
-APEXi N1 Catback

[The Iron Goat]

Hey Goat, leave the paint for later. It'll get you to the track sooner!

I'm so torn on this issue!! I want to do the paint while the car is torn apart right now, but I'm also dying to get it on the road. My inner DSM is fighting with my inner Aicraft Mechanic.

"Get that bitch on the road!!!!"
"No, we must inspect every bold for corrosion and structural integrety!!!"
"Man, balls with that! You'll fix it when it breaks!"
"No, no, no. Do it right the first time and it'll break less!"
"Who cares? It's gonna break one way or the other!"
"But there needs to be weight reduced, machined alumnium to be installed!"
"GET THAT BITCH ON THE ROAD!!!! NOW!!!!"

The battle gets worse as the climate brightens. Oh boy, I don't know what's gonna happen.

[mitsu90]

I hope to have the engine back in the car and running by April. Who wants a piece of the overweight A/T?

-Injen Cold Air Intake
-Greddy Type-S BOV
-Greddy IC Piping all around
-FP Ported Big16G
-Ported O2 Housing
-Ported EVO III Exhaust Mani
-APEXi N1 Downpipe
-APEXi N1 Catback

you should buy a hight stall converter.

with my A/T dead looks like you will have the fasted auto on the site.

[black92_tsi_awd]

[quote=The Iron Goat,Feb 24 2006, 09:19 AM] [/QUOTE]The battle gets worse as the climate brightens. Oh boy, I don't know what's gonna happen. [/quote]
I feel your pain..I still have a fender in the shed to replace the one with the huge rust hole in it. Too busy wrenching to keep it alive and trying to make it faster to take the time to replace it!!

[turbohcar]

The battle gets worse as the climate brightens. Oh boy, I don't know what's gonna happen.

What color are you going to? Are you going with an original (or close to original) color or are you doing a complete change? If it's close to original you may be able to get away with doing it with everything back together.

[The Iron Goat]

What color are you going to? Are you going with an original (or close to original) color or are you doing a complete change? If it's close to original you may be able to get away with doing it with everything back together.

It's going to be a deep cinnamon red metallic. I really want to strip the car down to the frame and do a thorough inspection of all the parts, though. I just can't justify what's half-assing it in my mind when it's just sitting in the garage and doesn't need to be driven. The engine will be out soon, and that's the big part of the battle.

[AWD DSM 1]

A true perfectionist at work!