 Bad GM MAF?? |
  |
 Jul 1 2006, 03:48 PM
Post
#21
|
|
 Eats and sleeps DSM jargin.  Group: Members Posts: 1,995 Joined: 27-November 04 From: Yates City IL Member No.: 389  |
Alright, I'm an idiot..the .00 reading was caused by the base setting being set for 580 injectors!!! So that's why it was getting the so lean reading at idle. That would probably also be the reason it wasn't hitting fuel cut, due to adjusting (reducing air HZ)for 580's.
Funny thing is it loved that setting,pulled hard, no fuel cut, less than 3 counts of knock and .8 O2 at 14 psi of boost. So I went back and re-evaluated my settings. Since I'm running a base pressure of 44psi, it should make the stock 450's act like 490's. So I set the base settings for 490's started tuning from there again. I'm having a bitch of a time getting the trims to the rich side and reducing the base setting to a lower injector size just gets me into fuel cut quicker. So for those with more MAFT experience: At the dragstrip has anyone jacked the injector base setting up to stay out of fuel cut. I figure with some race gas in the tank, as long as it's not knocking it should be fine right? If none of this make sence, I'm sorry, I've been messing with this thing all week and my brain is shot. I'm about to rip in all out and go back to the stock setup for tomorrow! -------------------- 92 Eagle Talon TSI AWD "The Black Golfball" How fast can a 14B go???
91 Chevy C1500 "Problem Child" **SOLD** 01 Impala DD 07 Trailblazer Wife's new DD Cars run on blood, sweat, and horsepower... Without the first two, you can't get the last" SOB Racing "Sitting On Blocks" |
 |
 
|
|
Jul 2 2006, 12:29 AM
Post
#22
|
|
 Post Master Group: Members Posts: 780 Joined: 14-July 04 Member No.: 338 |
I know some of the guys have set the base setting "incorrectly" to get the desired results out of the tune. That's all that really matters.
-------------------- QUOTE (gsxracer80 @ Oct 31 2006, 12:41 AM)
thanks hcar.... I am still massaging that area trying to get it ready...  |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 29th April 2026 - 05:18 PM |
Powered By IP.Board
© 2026 IPS, Inc.