 Turbo not spooling |
  |
 Sep 2 2006, 03:16 PM
Post
#1
|
|
 DSMCentral Freak Group: Tech Moderators Posts: 388 Joined: 19-September 02 From: Pekin Member No.: 11  |
Well I put the intake back on fired her up and everything seemed to be ok except for the starter squealing after putting it back in and I still have a high idle, but I think that is now because the throttle plate is open a bit too far so that is not that big of a deal at the moment.
When it started up it ran alot smoother that before and sounded pretty good. Problem is when I took it out for a drive I am getting NO boost. 5K in second at WOT and no boost what so ever. In fact the boost/vac gauge does not even make it to zero. I checked the turbo and it looks ok there is no shaft play and it spins freely. Could it be that the wastegate stuck open or that the mbc is f'd up? When I put it all together I let it run for a couple of minutes and then I revved it up and when it hit about 6K I heard a pop and saw a small puff of smoke but I don't know where it came from. -------------------- Brian J
1996 Talon TSI AWD Great indeed is the power of the dragon as the sun, yet humbly and slowly it meanders its way shy, minuscule indeed is the power of the tiny scorpion, yet it swaggers its tail and boasts to the sky. |
 |
 
|
|
Sep 2 2006, 05:25 PM
Post
#2
|
|
|
DSM Tech Wizard  Group: Members Posts: 2,256 Joined: 10-January 01 From: central IL Member No.: 10 |
boost leak check time!!!
-------------------- The fastest car I own is a minivan....
|
|
|
|
|
Sep 5 2006, 01:45 PM
Post
#3
|
|
|
DSMCentral Freak Group: Tech Moderators Posts: 388 Joined: 19-September 02 From: Pekin Member No.: 11 |
QUOTE (scorp28 @ Sep 2 2006, 04:16 PM) I checked the turbo and it looks ok there is no shaft play and it spins freely. Could it be that the wastegate stuck open or that the mbc is f'd up? When I put it all together I let it run for a couple of minutes and then I revved it up and when it hit about 6K I heard a pop and saw a small puff of smoke but I don't know where it came from. Well I decided to pull the turbo to have a closer look at everything and............... looks good, spins freely, and no shaft play  my parents always told me I would lose my head if it wasn't attached.........has anybody seen my turbine wheel? I seem to have misplaced it   Nevermind. I found it  I really need to start proofreading. Changed compressor wheel to turbine wheel. DUH. This post has been edited by scorp28: Sep 5 2006, 11:57 PM -------------------- Brian J
1996 Talon TSI AWD Great indeed is the power of the dragon as the sun, yet humbly and slowly it meanders its way shy, minuscule indeed is the power of the tiny scorpion, yet it swaggers its tail and boasts to the sky. |
|
|
|
|
Sep 5 2006, 04:30 PM
Post
#4
|
|
|
DSM Tech Wizard Group: Members Posts: 2,404 Joined: 16-December 03 From: Fletcher/Bloomington Member No.: 214 |
 Wowzers! Now we know a little why it was running so poorly. -------------------- "I hear he tunes the space shuttle also...and that thing is fast"
|
|
|
|
|
Sep 5 2006, 05:39 PM
Post
#5
|
|
 DSMCentral Freak Group: Members Posts: 259 Joined: 6-February 04 From: Bloomington Member No.: 233 |
 Such a Travisty 
-------------------- Yeah!!!!!!!!!!! AND WASH THAT THING OFF BEFORE YOU COME BACK!!! GROSS
FP 3065, Ported 2G exahust manifold, AEM EMS, 3" 02 housing, Shepard Racing Stage 3 tranny, Fadinza 8 LB. flywheel, Exedy stage 2 tripple puck thick ceramic cluch, 08 from the tank to filter, -6 to rail from filter, Aeromotive FPR 1:1 riseing rate, Crower Stage 4's. All of that and I don't know what I want to do next. |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 1st May 2026 - 08:45 AM |
Powered By IP.Board
© 2026 IPS, Inc.