 brake maitenance and upkeep, ????? uh why doesnt it work? |
  |
 Dec 12 2003, 03:09 PM
Post
#1
|
|
 Post Master  Group: Members Posts: 972 Joined: 30-October 02 Member No.: 34  |
Might want to check this thread for a similair occurence. Not a real fix but it might be worth a shot. From what one of these guys says worked for him I'd try a hair dryer to heat up the possible freezing and a drive down the block. Shouldn't hurt much for just the 1 block. If it works, problem solved (for now at least). If not then you've only lost 15 min or so.
Also, backing it out of the drive might help release it. I've had a similair thing I dealt with on the SHO with a sticking caliper though. When it was really bad it would drag the tire in first but if I put it in reverse I could free it up with a couple feet of going in reverse. http://www.rothbuilt.com/GatewayDSM/MBoard...ge=8966&forum=6 Sounds like the line froze with the recent cold weather. -------------------- |
 |
 
|
|
Dec 12 2003, 03:16 PM
Post
#2
|
|
 Post Master Group: Members Posts: 658 Joined: 7-October 03 From: Pekin Member No.: 181 |
im free to lend a hand if you need an extra one this weekend
*edit* wouldnt a heat gun work better than a hair dryer if you were gonna heat it up?? I got one if u wanna try it. |
|
|
|
|
Dec 12 2003, 05:17 PM
Post
#3
|
|
|
Post Master Group: Members Posts: 658 Joined: 7-October 03 From: Pekin Member No.: 181 |
QUOTE (spyonu2007 @ Dec 12 2003, 04:09 PM) should be wrenching on it this weekend. give me a buzz. I gotta work till 3 tomorrow. Ill hit ya up after that. |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 10th October 2025 - 01:25 PM |
Powered By IP.Board
© 2025 IPS, Inc.