Fuel feed line fitting |
Fuel feed line fitting |
Dec 26 2006, 09:45 PM
Post
#1
|
|
Web Administrator Yo! Group: Admin Posts: 516 Joined: 30-August 04 From: Mackinaw, IL Member No.: 376 |
A question for those of you that have upgraded your fuel lines... What fitting did you use coming off of the fuel pump housing? I have seen it documented as (and have) an Earl's -6AN 800106ERL straight swivel connector. The thing that I am wondering about is the fact that both the Earl's fitting and the stock tube are a female type compression surface. While I like a pair of females pressed together as much as the next guy I don't know if I can trust em.
-------------------- Fast & Furious on the outside...DSM under the hood!!!
|
|
|
Dec 29 2006, 11:15 PM
Post
#2
|
|
DSMCentral Freak Group: Members Posts: 259 Joined: 6-February 04 From: Bloomington Member No.: 233 |
I use bulkhead fittings. Sorry cant help you on the numbers, I'm an Aeroquip man.
-------------------- Yeah!!!!!!!!!!! AND WASH THAT THING OFF BEFORE YOU COME BACK!!! GROSS
FP 3065, Ported 2G exahust manifold, AEM EMS, 3" 02 housing, Shepard Racing Stage 3 tranny, Fadinza 8 LB. flywheel, Exedy stage 2 tripple puck thick ceramic cluch, 08 from the tank to filter, -6 to rail from filter, Aeromotive FPR 1:1 riseing rate, Crower Stage 4's. All of that and I don't know what I want to do next. |
|
|
Dec 29 2006, 11:16 PM
Post
#3
|
|
Web Administrator Yo! Group: Admin Posts: 516 Joined: 30-August 04 From: Mackinaw, IL Member No.: 376 |
As in blocked off the original feed line and plumbed a new one?
-------------------- Fast & Furious on the outside...DSM under the hood!!!
|
|
|
Dec 30 2006, 08:09 AM
Post
#4
|
|
DSMCentral Freak Group: Members Posts: 259 Joined: 6-February 04 From: Bloomington Member No.: 233 |
No, just drilled out the stock feed. I always use -8 but the stock hard line isn't so big that a -6 bulk head fitting shouldn't work.
-------------------- Yeah!!!!!!!!!!! AND WASH THAT THING OFF BEFORE YOU COME BACK!!! GROSS
FP 3065, Ported 2G exahust manifold, AEM EMS, 3" 02 housing, Shepard Racing Stage 3 tranny, Fadinza 8 LB. flywheel, Exedy stage 2 tripple puck thick ceramic cluch, 08 from the tank to filter, -6 to rail from filter, Aeromotive FPR 1:1 riseing rate, Crower Stage 4's. All of that and I don't know what I want to do next. |
|
|
Lo-Fi Version | Time is now: 19th May 2024 - 09:06 AM |