wondering if any one had an adapter for a 1g fuel rail so I can change fuel pressure regulator to an aftermarket piece.

by the way does anyone have any dot drags for a 16x8 rim, or even a 18x9.5 rim
that they will part with

vicary day was a little slow, but none the less interresting.
good to see you there marcus, and I'm definately looking forward to the 6th

maybe I can scrounge up some dot drags for the z and actually be able to launch it.

anyone going tonight, in Cordova.

just curious,

finally got my beast to run.

I'd love to run some of you guys.

hey guys,

I 'm having problems with performance parts place, still havent recieved my boost controller.



so i am in dire need of a boost controller

manual... or electric, to buy or borrow


i know someones got a manual one laying around.

help a brother out,

I can trade some 1 parts if anyone is interested


zach

includes cvs and what not, great condition. I forgot I had it for awhile, came across it in the garage


will accept any reasonable offer, maybe even less than reasonable.

zach

I have a pretty blue talon tsi awd auto car,

no motor or trans,

not too bad looking,

i know someone wants it...

$250 obo.

Please someone come get this thing, and do what you will to it...

I need the space in the shop.

you can easily make some good cash on parting it out.

or if you so desire, throw a motor and tranny in it and it's not a bad looking car.


please, I need the money to break into the 14s with my z car.(that is sad)


pictures are available!!!!

I put some pictures up in the gallery of this car

and upon further examination there is a little surfac rust in front of the rear wheels


anyways, the pictures were accidently placed in the 2004 nopi race wars album( i'm not sure how I did that. but they are on the last page.

if anyone knows how I can get them moved to my album, please let me know.

zach

91 tsi awd auto rolling

dark blue with the grey lower body,

descent car driver fende has ding and some rusting, other wise rest of body is rust free.

interior is excellent, except i have the trunk pieces torn out.

tires are practically new.

$600 takes it, great to build or for parts

Alright you guys, this thing needs to go, I need space in the shop,

take the whole car minus eng and trans


first 350 takes it.

for those who are wondering, the car is located in Hanna City,

I myself am located in Bartonville.

Too my knowledge they are the same car minus headlights, speedometer(can car uses klh) and the seatbelts

the drivers side is the hardest to find ,but yes you can have it for 30

91 talon tsi

parting it out,
dash parts are for sale, control knobs, vents trim...let me know what you want this was an auto car.
seat belts are for sale, get this canadian car, so they are NOt the power seat belts you can have the belts and the trim that goes with them for 40
seats are cloth great condition 150 for the pair
rear seats-50
hood-50
rear hatch -50

fenders are 25 except the driver front, it has a ding and some bubling-10
doors are gonna be 25 apiece

factory tsi wheels with very low use kumho tires-150 forthe set
lower control arms-15 a piece
new front cv shafts-60 for the pair
fuel rail 1g 15.
1g intake manifoldsx2- 15 a piece
NOS system...wet direct port 4 cylinder system never installed. missing steel braided line that comes from bottle to engine compartment and the the bottle brackets..
uses super power shot n20 solenoid with a powershot fuel solenoid.... bottle was repainted but has a couple chips and scratches in paint, high flow valve on bottle... 300 for the kit.
want to know anything pm me. want to know what a part looks like, pm i'll show youyou can come look at.

you guys have no idea how much I sit here and laugh

300z forums suck, all day long they wonder if the vaccum sound that comes from removing the gas cap is normal or not...( I"m not kidding)

you guys rock, can I still hang here?

First what is your desired flywheel hp?
and at what psi of boost will this be attained at.
are you batch firing of sequential.
take total hp multiply by the brake specific fuel comsumption of your motor. ( most claim o.62 on 2 liter turbo. an divide that by the number of injectors to be used times the max duty cycle, that will get you lbs/hr for injector. multply this number to by 10.5 to convert to cc's

example: 500hp x .62 =310. divide by 4x.80 =96.875lbs/hr
and maximum 80% injector duty multiply by 10.5 to get cc's wich would equate to 1017 cc injector at 43.5 psi
this injector is way to big, because you will not be making max hp at only 43.5 psi instead...

the more boost the more fuel
example 25 psi of boost, then fpr 1psi boost = 1 more psi of fuel.
you will now be running 68.5 psi fuel pressure

I love math (remember this 80% duty cycle, it should not be breached or possible failure of injector could result)

since you will be using 68.5 psi instead or the 43.5 psi, you take 68.5 and divide by 43.5 to get 1.5747
you then take the square root of this number, which would be 1.25487 and multiply this by the original injector fuel flow of 1017cc of fuel and you would be pushing 1276 cc's of fuel into this beast.
which is way to much fuel.. so lets go backwards and take away 25 psi by dividing our 1017 cc by 1.25487 and we would then get 810 cc's


so size 810cc's @43.5 psi is what is required to support our 500hp motor runing 25lbls of boost and 68.5 psi of fuel pressure.

now... batch or sequential?
by the numbers 810 will work for both sequential an batch
sequential...810 at the minimum, throw in a set of 1000cc injectors, tune your aem ems, call it a day.
batch... you can probably get a way with a little smaller ie. 750s with out a hint of a lean condition problem. but i would get the 800 + injectors just to be safe

next question.

do you have enough fuel pump.
in our example you need a pump that will support 310lbs/hr of fuel at almost 70psi
make sure its there.

FS/

91 talon tsi awd body parts,
set of 4 factory wheels in good condition with almost new kumho tires-150 for the set

interior in excellent condition, if i may quote "spy" the fabric on the seats is supposedly a not too common pattern.

front seats-200 for pair

brand new kyb agx adjustable shocks, in the box
300 set of 4

new front strut brace, 25


if you need anything stock give me a message, I will yank it off the car for you,

does anyone have an obd1 computer to plug in to a nissan.

I'm only missing i think on 1 cylinder, but I don't know if it is spark or fuel.

any other ideas.

zach

Well I'm done with dsm's and turbos, intercoolers , and what not.

but I did pick up a sound little 300zx NA that will eventually become a rolling nitrous bottle

I've owned the car for a coulple days now, it is a blast. even if your riding shotgun and your friend, who is a competent drive, Scott(white checkered 3000gt vr4) decides to see if a stock nissan with cheap tires on it can corner just as fast.

lets say, 2 complet 360's and a 180 the opposite direction sliding across 3 lanes, missing oncoming traffic by a few feet and just stopping a couple feet shy of the guard rail

no cops, no problem, we were on our way.


Now i need you guys to buy up the rest of my suff so I can put good rims and sticky tires on the Z, my safety depens on it.

I still have a set of brand new KYB Agx adjustable for an AWd

still in the box, 325 obo.

450 will take the o2 housing through the back of the car though,

if your still interrested

never installed cylinder head fully ported polished oversized stainless steel valves
new hks 272 intake and exhaust cams
new crower spring and retainer kit
used man cams
lifters/rockers included
-1500 for all

Fuel system to support john shepards car...
Big ass aeromotive eliminator fuel pump (11104) summit sells it for 420,
brandnew -$325
brand new aeromotive fuel pressure regulator NEW 135 SELL FOR $100
brand new aeromotive in line fuel filters will support the flow of any pump
these are expensive, I think I paid 80 for one and 120 for the other.
brand new earls fuel fittings, I paid 600 for the fittings and the filtters
brand new RCI alum 10 gal fuel cell, summit sells them for $170
I sell for $100
TAKE ALL $1000

fuel injector clinic 850 cc matched injectors, new they are $385 sell for $325


exhaust
brand new evo3 ported runners and 7cm gasket opening new$300 I sell for $250
Brand new VRS 02 eliminator downpipe and o2 housing new 370 I sell for $300
Brand new 3" test pipe and 3" catback system Mandrel bent $300
ALL EXHAUST SYSTEM FOR $750



brand new energy suspension poly uerathane bushings, both front and rear kits
new 150 for both, I sell for $100

brand new Fluidyne aluminum radiator with dual new 12" slim electric fans
new 400 for rad, 120 for fans,
TAKE all for $400


never installed 91 auto tranny, completly built with level 10 racing overhaul, and translab shift kit. rated at 750hp
level 10 sells for 2850, I sell for $900

brand new precision industries racing custom billet tourque converter 3500 rpm stall
new 1150, I will sell for $650

91 eagle talon tsi awd automatic canadien car 130,xxx miles new reman fron cv shafts, 4bolt rear end dark blue new kumho tires, no eng, no tranny, parts car or project car,
pretty decent shape.$450

a pair of 1g intake man $10 a piece

brand new kyb agx shocks $325

brand new 1G strut tower brace, adjustable, red $30

NOS direct port pro fogger nitrous kit, good for up to 200hp
included is a remote bottle opener, bottle is custom painted color changing paint, high flow syphon on bottle.-450 obo

I will add more when I remember it or ask I might have it

thanks

zach

short block assembly
forrester racing intake/throttle body

are sold now

intercooler,
gm mass air/ translator
boost guage
egt guage
battery relocation
engine mounts

are all sold,

some other things are pending,

but money buys it, not "I wants"

I have a an evo 3 exhaust manifold, fully ported for sale.

zach