 i hate my car |
  |
 Dec 17 2005, 12:47 PM
Post
#1
|
|
 DSMCentral Freak  Group: Members Posts: 271 Joined: 6-June 04 From: East Peoria Member No.: 306  |
The other day i was coming home from work. I was on the interstate curseing and went to get off on my exit and my car woulent down shift or go in to any gear at all. So i sat their pumping my clutch. Then i jamged it in to 2 and crused home. so the next night it did the same thing. I went out to go buy a new slave Cylinder (i have a biger push rod in) and put it in and drove around for a wile and that worked for a lil bit then i got home and was looking under my dash and saw that their was brake fluid leaking out of the master Cylinder .So i repaced that and it was working just fine so i went out to get my hair cut and pay some bills and get gas and then thats when it messed up again. so i was stuck at the gas stas, so i shut the car off and press the clutch in and put it in to first and start it, it wants to take off then after i do that it will go in to gear fine for a wile this is realy pissing me off and the onlything i can think of its the throwout bearing. sometimes it make noise it a xtd stage 3 race clutch 6 pud. I was just wondering if any of u guys ran in to this problem.
-------------------- www.myspace.com/rs91
|
 |
 
|
|
Dec 17 2005, 12:52 PM
Post
#2
|
|
|
DSM Tech Wizard Group: Members Posts: 2,404 Joined: 16-December 03 From: Fletcher/Bloomington Member No.: 214 |
LOL, despite that being the most erronous spelling post I've ever seen, I actually understood it. Yes, it very well could be your throw out bearing. Did you put a new one in when you did the clutch? Midwest DSM had the same problem with his old 90, the TOB froze and would not move. Even if you put a new one on, you're supposed to lube the input shaft with bearing grease so that it gets a smooth disengagement every time. Looks like that transmission's gotta come out. Sorry bud.
-------------------- "I hear he tunes the space shuttle also...and that thing is fast"
|
|
|
|
|
Dec 17 2005, 01:03 PM
Post
#3
|
|
|
DSMCentral Freak Group: Members Posts: 271 Joined: 6-June 04 From: East Peoria Member No.: 306 |
Yea i did get a new throw out bearing when i did the clutch. I dont think it was grease tho so thats my fuc* up. this sucks i hate pulling trannys this would be the 4th time this year lol.
-------------------- www.myspace.com/rs91
|
|
|
|
 Dec 17 2005, 01:53 PM
Post
#4
|
|
 Post Master Group: Members Posts: 864 Joined: 12-July 05 From: Illinois Member No.: 556 |
all the more reason you should hurry and buy the awd from me.
-------------------- "One of the most Crazy and Undecisive Members in central Illinois"
|
|
|
|
|
Dec 17 2005, 02:01 PM
Post
#5
|
|
|
DSMCentral Freak Group: Members Posts: 271 Joined: 6-June 04 From: East Peoria Member No.: 306 |
i would buy it back in a heart beat but right now i need to get a dd and i cant make my race cars my dd
-------------------- www.myspace.com/rs91
|
|
|
|
|
Dec 17 2005, 03:00 PM
Post
#6
|
|
 Post Master Group: Members Posts: 780 Joined: 14-July 04 Member No.: 338 |
QUOTE (asiankid91 @ Dec 17 2005, 02:01 PM) i cant make my race cars my dd Get those words tatooed on your forehead!  It'll save you A LOT of frustration.
-------------------- QUOTE (gsxracer80 @ Oct 31 2006, 12:41 AM)
thanks hcar.... I am still massaging that area trying to get it ready...  |
|
|
|
|
Dec 17 2005, 03:14 PM
Post
#7
|
|
|
Post Master Group: Members Posts: 864 Joined: 12-July 05 From: Illinois Member No.: 556 |
Then you can make the laser a dd and the awd your race car. Besides even your dd is going to be modified, you cant leave anything alone.
-------------------- "One of the most Crazy and Undecisive Members in central Illinois"
|
|
|
|
|
Dec 17 2005, 05:18 PM
Post
#8
|
|
|
DSMCentral Freak Group: Members Posts: 271 Joined: 6-June 04 From: East Peoria Member No.: 306 |
yea thats ture but i will let u no
-------------------- www.myspace.com/rs91
|
|
|
|
|
Dec 18 2005, 02:27 PM
Post
#9
|
|
|
DSMCentral Godfather Group: Admin Posts: 3,823 Joined: 10-January 01 From: Washburn Member No.: 26 |
I had a similar problem with less exagerated symptoms one time. I didn't find the cause until my GVR4 first gear blew up though. When I pulled the transmission I found that the center section of my ACT2600 had come apart (two separate metal discs and all the springs). That wasn't so bad. The fact that it screwed up my throwout bearing slide tube WAS a big deal. That tube the throwout bearing slides on is an intregal part of the bell housing and half of the transmission case. So I had to trash my transmission, use what parts I could salvage and start over with another. That's when I got the 93 transmission.
So if your problem is just a throwout bearing, consider that it could have been worse. 
-------------------- In Loving memory of David T Crebo
Greatness comes from the most unexpected places!  |
|
|
|
|
Dec 18 2005, 03:07 PM
Post
#10
|
|
|
DSMCentral Freak Group: Members Posts: 271 Joined: 6-June 04 From: East Peoria Member No.: 306 |
I am just hoping that it is the throw out bearing. I haven't pull its out yet. I am to dam lasie and its to cold to pull it out in the show. If anyone is willing to let me use thiere garage let me no
-------------------- www.myspace.com/rs91
|
|
|
|
|
Dec 26 2005, 09:30 PM
Post
#11
|
|
|
DSMCentral Freak Group: Members Posts: 271 Joined: 6-June 04 From: East Peoria Member No.: 306 |
well today i pulled the tranny and the throw out bearing was just fine. so i was looking at the pressure plate and i saw a lil spring siting in their. so i took it off and all of the springs had some wear and about to fall out. So thats why it wouldent go in to gear the spring was in the way of the pressure plate. man i hate my car so i got to send it back off to cal and wait for like 3 weeks. any one have a stock clutch and pressure plate??
-------------------- www.myspace.com/rs91
|
|
|
|
|
Dec 26 2005, 09:46 PM
Post
#12
|
|
 Eats and sleeps DSM jargin. Group: Members Posts: 1,108 Joined: 2-October 05 From: Waverly, Illinois Member No.: 636 |
Yes! When do you need it?
-------------------- Thanks, Bud!
 |
|
|
|
|
Dec 27 2005, 12:10 AM
Post
#13
|
|
 Post Master Group: Members Posts: 810 Joined: 9-July 03 From: Bloomington, IL Member No.: 151 |
hey man, could be worse. I had a TOB sieze on me once and this was the outcome:
|
|
|
|
|
Dec 27 2005, 07:23 AM
Post
#14
|
|
|
DSMCentral Freak Group: Members Posts: 271 Joined: 6-June 04 From: East Peoria Member No.: 306 |
dam thats got to suck never seen one like that.
bud i will give ya a call later -------------------- www.myspace.com/rs91
|
|
|
|
|
Dec 27 2005, 09:52 AM
Post
#15
|
|
|
Eats and sleeps DSM jargin. Group: Members Posts: 1,108 Joined: 2-October 05 From: Waverly, Illinois Member No.: 636 |
When you wake up give me a call. I have a clutch, pressure plate, and throw out bearing for you. Yours free of charge man!!!!!
-------------------- Thanks, Bud!
|
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 8th October 2025 - 06:20 PM |
Powered By IP.Board
© 2025 IPS, Inc.