Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> The right way to build a car, attention to detail is key
akamiami
post Jun 15 2006, 03:23 PM
Post #1


Eats and sleeps DSM jargin.
******

Group: Moderators
Posts: 1,156
Joined: 23-September 02
Member No.: 16



Considering how much activity there is on the board, I thought I'd initiate a topic for discussion.

I received the new issues of Modified Mag and SCC in the mail recently and, for a change, each had at least one article worth reading. The Modified Mag had a short story about an R34 Skyline prepared by Midori. The SCC article was a feature story about a chassis builder in Japan known as Opera Performance. Each featured cars with unbelievable attention to detail, expert craftsmanship, and cars with relatively minimal 'typical' modifications that ended up being ruthlessly impressive in the end. I'm not going to repeat a lot of the information, you'll have to read the articles for yourself, and if you don't, your loss.

Bottom line is that when I read the articles, I was very impressed by the skill of the shops and builders, as this was about two relatively small shops in Japan which have built world class machines. So far as I know, for all the time and attention US import tuners have put into their vehicles, we're not even close. Our premeir shops are just now starting to put together time attack cars, and in my opinion, they're pretty shitty examples of American half-assed-ness. Even their drag cars, the cars they're most proud of, have obvious room for improvement. Could I do better? No, but I'm not doing this for a business, and as such, not held to such a level of scrutiny.

Call it JDM fan-boy bandwagoning if you want, or just being over-critical of others work, in the form of nitpicking US shop cars, but I think that the shops in the US need to get a kick in the nuts. When a car that could very well be driven on the street comes within .4 seconds of breaking the fastest lap time of the JGTC300 record holder at Fuji International, who gives a flying f-bomb if the AMS Evo put down 988 whp. I could give a damn, because shaving nearly 1/3 off the weight of a S2000 is immensely more impressive.


--------------------
my cars breath smells like car food
Go to the top of the page
 
+Quote Post
99Spyder
post Jun 15 2006, 06:51 PM
Post #2


Web Administrator Yo!
*****

Group: Admin
Posts: 516
Joined: 30-August 04
From: Mackinaw, IL
Member No.: 376



I myself just left the throne where I was reading/skimming the same modified mag. Perhaps it is just me but for some reason I do not get too excited about $50,000+ shop cars. The only thing that I got out of the article that you mentioned is that I did not like the wheels on one of the Skylines as I turned the page. Will I ever own a Skyline? Highly doubtful. Will I ever invest the time and money to compete at the performance levels at which these cars perform? No, I could not imagine what my financial situation and marriage would be like if i did. I understand the US vs. Japan rivalry and of course want some bad ass cars from the US but oh well. I am sure that Tokyo Drift will be the bomb either way.

Perhaps I am wasting my money to have a subscription to a magazine that I can read in 2-3 s(h)ittings but perhaps I am also wasting my time to thumb through an article which doesn't spark my interests. Come to think of it... you know when I purchased the subscription... right when they started project DSM. They started building a 2G Talon and got it as far as a 2.3 stroker, built head, and a EMS and dropped it before giving any stats. I guess I read each month in hopes of that article to return. unsure.gif

I see that I did not add anything positive to the way a car should be built but more critiqued magazine content. I do respect shop cars and envy their performance. If I saw one in person I would look it up and down like a fine piece of a$$. I just don't get the same feeling, if it is in print, unless it is sportin a 4G63. At least then I can see what part choices were made and take that knowledge towards my own setup. They have Honda Tuning and a Suburu mag. Where in the hell is the DSM Quarterly?


--------------------
Fast & Furious on the outside...DSM under the hood!!!
Go to the top of the page
 
+Quote Post
scrapin_frame
post Jun 15 2006, 07:07 PM
Post #3


DSMCentral Freak
****

Group: Members
Posts: 352
Joined: 7-July 04
Member No.: 319



QUOTE (akamiami @ Jun 15 2006, 03:23 PM)
Considering how much activity there is on the board, I thought I'd initiate a topic for discussion.

I received the new issues of Modified Mag and SCC in the mail recently and, for a change, each had at least one article worth reading. The Modified Mag had a short story about an R34 Skyline prepared by Midori. The SCC article was a feature story about a chassis builder in Japan known as Opera Performance. Each featured cars with unbelievable attention to detail, expert craftsmanship, and cars with relatively minimal 'typical' modifications that ended up being ruthlessly impressive in the end. I'm not going to repeat a lot of the information, you'll have to read the articles for yourself, and if you don't, your loss.

Bottom line is that when I read the articles, I was very impressed by the skill of the shops and builders, as this was about two relatively small shops in Japan which have built world class machines. So far as I know, for all the time and attention US import tuners have put into their vehicles, we're not even close. Our premeir shops are just now starting to put together time attack cars, and in my opinion, they're pretty shitty examples of American half-assed-ness. Even their drag cars, the cars they're most proud of, have obvious room for improvement. Could I do better? No, but I'm not doing this for a business, and as such, not held to such a level of scrutiny.

Call it JDM fan-boy bandwagoning if you want, or just being over-critical of others work, in the form of nitpicking US shop cars, but I think that the shops in the US need to get a kick in the nuts. When a car that could very well be driven on the street comes within .4 seconds of breaking the fastest lap time of the JGTC300 record holder at Fuji International, who gives a flying f-bomb if the AMS Evo put down 988 whp. I could give a damn, because shaving nearly 1/3 off the weight of a S2000 is immensely more impressive.

preach on brotha!!!! biggthumpup.gif
Go to the top of the page
 
+Quote Post
akamiami
post Jun 16 2006, 09:45 AM
Post #4


Eats and sleeps DSM jargin.
******

Group: Moderators
Posts: 1,156
Joined: 23-September 02
Member No.: 16



spyder, I know what you mean about the magazines disappointing, particularly with the project cars. In many ways, I think they're similar to the average enthusiast, but with a bigger budget. They pick up a car, with high hopes and lofty aspirations, install some early mods, but rarely complete the project.

If you're looking for an example of one that was completed, and done quite well, I'd look up the 10 stage RX7 buildup in SCC's archives. It is available on their website, along with the buildup stages of several other cars. Good reads.

I'm not expecting the shops in the US to use wiggins clamps on every connection, or exclusively fabricate their intercooler pipes, intakes, and exhausts out of section welded inconel. But that is the type of thing that pushes the market into new areas and more importantly, makes the previously high dollar parts like twin disk carbon clutches more affordable for the average enthusiast. Neither of the cars featured, really had all that much done to the engines, considering the showcase quality of the chassis fabrication was so notable.

Here's an idea: If one US shop invested in carbon fiber production capabilities rather than a dyno, they could produce innovative carbon fiber products and secure a definate competetive advantage over the other shops. This would differentiate them from the slew of shops that strictly focus on one aspect of performance (hp vs weight argument, yada yada) and make these 'exotic' parts more readily available to us, the consumers.


--------------------
my cars breath smells like car food
Go to the top of the page
 
+Quote Post
akamiami
post Jun 16 2006, 10:08 AM
Post #5


Eats and sleeps DSM jargin.
******

Group: Moderators
Posts: 1,156
Joined: 23-September 02
Member No.: 16



Link to the SCC project cars


--------------------
my cars breath smells like car food
Go to the top of the page
 
+Quote Post
Itz Darave
post Jun 16 2006, 02:12 PM
Post #6


HONDA KILLER
*

Group: Members
Posts: 14
Joined: 29-October 05
From: Olathe, KS - Urbana, IL
Member No.: 679



http://www.diemanmotorsports.com 45 minz from me... 1000+ R33 skyline...

I cant wait till i go for a ride in it... =)
Go to the top of the page
 
+Quote Post
akamiami
post Jun 16 2006, 03:54 PM
Post #7


Eats and sleeps DSM jargin.
******

Group: Moderators
Posts: 1,156
Joined: 23-September 02
Member No.: 16



Where is that? I'm not sure where you're located at nowadays Dave.

I just see yet another shop that seems to focus on HP. A dyno run is a _very_ poor way to evaluate a car's performance.


--------------------
my cars breath smells like car food
Go to the top of the page
 
+Quote Post
Itz Darave
post Jun 16 2006, 06:57 PM
Post #8


HONDA KILLER
*

Group: Members
Posts: 14
Joined: 29-October 05
From: Olathe, KS - Urbana, IL
Member No.: 679



Dieman Motorsports is located in Lee Summit, Missouri.

They mainly work on Highend sport compacts. And they are affiliated with some guys that work on Mustangs too... www.houseofboost.com i think is their sight...

Pretty much Dieman used to have a store front and sell stuff here and there but they mainly work on cars... Now they just do work by appointment... They have accounts with pretty much every company... and the main one I like is the HKS account... cause hes a pro HKS vendor so i get a good discount cause i get some things wholesale from him...

Some shops build cars but noone knows much about the shop because they arent bigg time, and they probably dont want to go biggg time or are slowly getting there... just like AMS... ive never heard of them till like last year...
Go to the top of the page
 
+Quote Post
akamiami
post Jun 18 2006, 03:50 AM
Post #9


Eats and sleeps DSM jargin.
******

Group: Moderators
Posts: 1,156
Joined: 23-September 02
Member No.: 16



Based purely on the article I read in SCC about the Opera S2000, I played GT4 a bit this evening and purchased the Opera car for 150,000. It does indeed handle quite well and is very quick for a relatively stock motor s2k. In fact, I drove it on Tsukuba Circuit and was able to duplicate the 1:01 lap-time after only a handful of tries. That's quick for a 270hp car.

Good times.


--------------------
my cars breath smells like car food
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 19th November 2026 - 10:09 AM
Design by: IPB Download & eBusiness Discussions