A/F gauge 95 Talon wich wire should I splice into @ the O2 sencer?? I have 4 and I dont know which 1., It is an Auto meter. and directions would be usefull thanks DLL 8)

It should be either the white or the grey. Take a volt meter and put one lead to ground. Then take the other and push it into the wires(with the car running) until you find the one that cycles.

I have an autometer A/F guage. I hope you don't plan to do any tuning with it... worthless. All it tells you is if your in open or closed loop.

2G ECU pinout:

http://www.vfaq.com/mods/ecu-harness-2G.html

front O2 sensor = pin 76.

Thanks for the info. Ok so the A/F gauge can not be for tuning? just for show you think if I plan on tuning I need one that is the volt meter kind? Thanks for you time D L L

If you want to know your true A/F ratio you need a wideband 02 sensor.
http://store.yahoo.com/machv/wio2sekit.html

The pocketlogger is definitely the most useful tuning tool.
http://www.pocketlogger.com/

An EGT guage is also somewhat helpful. Not as useful as a wideband or a logger, but definitely better than a narrowband A/F guage aka. blinky light show.

Thanks for the replys I got it now. It was the blue one I think.