No decent offer refused.

H4 headlight conversion- for 90-91 cars, unplug your headlight motors and let those babies shine through the covers, comes w/ H4 lamps-$30

Half of a 3in downpipe (02 housing down)(cut before the flex section) comes with about 7ft of 2.5in SS piping unbent, good for custom exhaust setup, just want to get rid of it-$15

Goodyear Engine Stand-1500 lbs capacity, will hold a big block chevy, brand new/assembled, sits on four castres and folds for storage-$50

2G stock 02 housing-like new condition-$15

1G stock diameter cat eliminator-$10

92 Talon wheels-decent condition-good for a FWD setup-two General tires (smaller), two Goodyear (stock size), tires are the same distance around just different widths, gotta trade for four same size tires mounted on good wheels

Hyundai valve cover - gives it that shaved look of stock cover "DOHC 16 valve"
phrase written over the exhaust cam side (pics on my webpage) will fit on any 4g63-$40

Starion FMIC-fair shape, has one small hole in the endtank easily weldable-$70

Piping for Starion int.-stock diameter exhaust piping made for this setup comes w/ couplers, came off parts car-comes w/ FMIC

2G MAS-good shape, unhacked-$40

1G MAS- very hacked up-$10

1G MAS- unhacked, need 550cc injectors first to sell it-$25

1G AC compressor-came off running car-$5

1G exhaust manifold- good shape-$50

1G stock AWD downpipe-great condition-$20

2G exhaust manifold- looks like new-$60

2G stock Infinity speakers-$30

2G stock intercooler-no leaks-$20

2G BOV w/modified piping-$10

Starion turbo exhaust housing- different 02 housing, looks like a 6cm-$5

WTB/TRADE
2.5in Buschur SS downpipe
550cc injectors
SAFC1
Autometer Phantom Air/Fuel Gauge

how much for the FMIC w/ piping? what are dimensions? will it fit the 2g?

16.5in wide
2 3/4in thick
8in tall

fair shape
very cheap setup

intercooler will fit with some fabricated brackets
piping probably won't

intercooler comes with piping, I don't want it, you can have it, it'll only work with the starion intercooler unless you cut it up

H4 conversion added
cat eliminator added
stock downpipe added
92 wheels added
2G 02 housing added

More items added.
Starion intercooler setup sale pending.

how much for the speakers?

there are two 6.5 (door speakers) and two 6x9s (rear) no tweeters

sell for $40

Anyone else? I'm open to making deals.

I'll give ya $30

Done deal!
Remember though, they are for a 2G car(stock speakers). High quality Infinitys.

will they not fit in 1G

You're going to have to modify the door panel mount if you want to put the 6.5's in the doors. You could use some short, self tapping wood screws (there's only three mount brackets, not four) and you're gonna need the harness for the 6.5's. I've got a set of harnesses from a parts car I could probably grab for you though. The 6x9's should bolt right up and wire up with some female connectors.

Prices all just went down a bit. Make an offer.
Engine stand added.
Misc. exhaust piping added, good start on either a 2.5-3in diameter exhaust

Prices added to encourage buyers. Cash talks. I've got bids on some things but none of it has been paid for yet so it's all still on the table.

you got pix of this

Nope but it's a really simple looking setup. It's just a plug and play harness that plugs into the existing harness and then plugs into the new lamp. For whatever reason the lamps I got with it have a large bushing in the back that kept them from going into my stock housings so you'll probably have to cut a little bit of the stock housing away if you want to use these. I'm not sure if it's just the brand of bulb or not. The parts car I took them from was a 90.

and they eliminate the flip up lights?

You don't eliminate them, you just keep them from flipping up. Hence the, unplug the headlight motors line. Then the H4 bulbs shine through the covers. The idea is that the H4 bulbs are brighter and more suitable for the job.

interesting but wouoldn't that tint the light coming out the color of your car??

Nope, the lenses are clear. You may have to move the adjustment screws to get the lights to shine the right direction but nothing major.

very interesting I don't like flip up lights much

Still nothing sold

WOULD YOU TAKE 30 FOR THE VALVE COVER AND HOW GOOD OF SHAPE IS IT

Reminds me of the first Austin Powers movie. Mike Meyers shouting:

"I CANNOT CONTROL THE VOLUME OF MY VOICE"

I want that downpipe! where are you located?

The valve cover is just dirty and has some crayon on it. It'll clean up really nice with some elbow grease or I can arrange to have it put in a jet washer for a little extra. Mine turned out really nice with a medium gloss powdercoat from Piercy's in Carlock.

The downpipe and misc. exhaust piping is about as close to sold as you can get.
Plans have already been set to get them out the door Thursday.

Come on boys, I need a little extra cash. I now have big plans for the Sebring, it's getting sold. The replacement is beyond words. Lets just say it pays to work for a car dealership! Make an offer. I'll post when something has been sold/traded for sure.