Lots of stuff that needs to go! Also have a 92 Talon that’s sitting in the drive with 90% pulled let me know if there are any odd parts you need I may have them. Located in Peoria.
1G Head 6 bolt very clean, just rebuilt 6k ago new valves and guides
1G Head 6 bolt needs valves, Looks ok but was showing 0 compression
2G pistons on 1G rods less than 10k miles .020 over in perfect shape ~ Make offer
1GB Hood black, needs painted
1GB Hood white, needs painted
92 Drive shaft (DIF to Xcase)
4 bolt differential
4 bolt rear axles and cups
Newer calipers for all 4 corners (single Piston)
2G exhaust manifold
Rear seats upper and lower (black on Black/Gray)
Front half shafts
23 spline Transfer case In Great condition
23 spline transfer case needs the front teeth where the shaft goes in (grinded away)
Cams and cam gears
Lots of 1GB headlights some good some need a little work
Tail lights 3 piece for Eclipse
Tail lights 3 Piece for Talon
Power Steering pump 3
1G Intake manifold
6 Bolt crank needs turned
Radiator with fans
92 Shifter Great shape
92 Shifter (a little loose)
Fuel pump assembly
Front control arms
Power mirrors (white)
Sunroof
Water to oil filter assembly
Valve cover
All kinds of interior pieces and odd crap
92 or 94 manual awd non eprom ECU

Sorry I don’t have any prices up right now I will try and get a price on everything soon I m just throwing everything I can think of up here, Make an offer on anything your interested in.


Block - transmission - turbo, not for sale

And I'm not really sure what a gargage is?

How much for the:
1GB Black Hood (whats the "B" stand for??)
2G Exhaust manifold
I need a RR caliper and mounting bracket


Do you have any fenders? Need a passenger side.

1Ga = pop-up headlights.
1Gb = non-pop-up headlights.

Maybe a clutch view cover?

Cool...I need the "b"

1GB Black Hood - 40.00
2G manifold - 55.00
RR Cal + Brckt - 20.00



Needs to be straightend out just a little in a vise. - $0.86

I tossed all my other fenders out, i have a white one on the car now in ok shpae a few dings. If you want it pull it and its yours.

I'll definitely take the caliper and mount.

I'm pretty sure I'll take the manifold, no cracks I assume.

On the fender...just minor dings, no rust? Mines got a big hole in it!

Few other things I need-if you got them...
-stock air cleaner toggle clamp
-cam cover
-a/c temp sensor plug

I didnt see any cracks on the manifold, but i will double check first.
Im pretty sure there is no rust i will take a look tomorrow
stock air cleaner toggle clamp????? Hmmm wheres it at?
cam cover - does not leak any oil but a couple of the bolt holes for the spark plug cover are chipped. 20.00
a/c temp sensor plug - I tossed everything AC related when i got the car.

The toggle clamp is on the stock air cleaner assembly, there's three of them, wire clamps that hold the 2 halfs of the air cleaner assembly together.

Sorry, I don't need the valve (cam) cover....I need the plastic part that goes over the 2 cam gears and timing belt.

Thanks

what do the boots loo like?

Half shafts will have to be pulled off of my 94. The ones i have out are less than 3 months old. The 94's have no cracks in the boots, a little dry from age but look to be in great shape.

how much for the heads?

..

Huh?

I would like to get atleast 165.00 for the good head and 60.00 for the other head. Comes with 92 manual cams and gears all lifters, rockers, valves, caps, ect just drop and go.

I have one but i think the plastic part where the screw goes through is cracked. So it will only hold down with one bolt plus the back. You can have the toggle clamp if i can find one.

PM sent

Could you hold the good head for me until I post back tommorow?

Head is already 99% gone. but If the deal does not go through you will be the first person i get ahold of. Thanks

how much for the 4 bolt rear axles?

I would like to sell the whole rear end if possible as it is easier to get rid of. Looking for 275.00 for the diff, axles, and cups. If it dosent sell though i will see what i can do on just the axles. 4 bolt out of a 92 awd

Did you get a chance to check the 2G exhaust manifold for cracks and the fender for rust??

PM me an address and phone number and we can set up a time.

PM SENT

RODS 1
RODS 2
RODS 3
RODS 4

REAR 1
REAR 2
REAR 3
Rear 4
DSHAFT 1

Let me know if anyone needs any pics of anything listed.