I tried calling the shop and neither number would work. I was just needing to get ahold of xian 1g about the inspection cover i was needing. Thanks

Jason

Also i tried to just go to the dealer to get one and they couldnt even find a part number for it, anyone know if by chance if i need to end up ordering one?

Verizon has finished rewiring half the building is is supposed to have us up "anytime".

If you've been calling over the past few days you may have noticed that it would give you an entirely different number than you dialed and tell you it wasn't in service. They've resolved the routing issue there and are "supposed" to have us finally fixed again tomorrow (note sarcasm/irony here).

Were you needing the inspection cover (small plate that allows bottom flywheel viewing bolt from near oil pan to tranny) or starter locator plate (bolts behind flywheel and has a hole for the starter)?

Upon closer inspection i need both, they are both mangled up/broken/missing. I can paypal the payment to you w/shipping asap. Thanks travis

Jason

I'll pm you with more information, jason. Been moving the past half week and limited on internet access.

Tell Mitsu to get their heads out of their buttocks! Drive to the Mitsu dealership, make sure you give them your VIN number, and tell them you need the flywheel view cover that attatches to the engine and covers the transmission bellhousing. They are able to pull up a picture of what it looks like. The difference is that theirs only pulls up one for a FWD automatic so you have to tell them you want the semicircle looking one that will work with your VIN number. Sometimes their pictures are a little funny so you have to kind of interpret what it shows. Have them print off a picture for you so you can point to it for them.

Well the problem is the mitsu dealership is over an hour and a half away, so i been going to the chrysler dealership instead. So far everythings come out fine (ordering for an eagle talon instead of mitsu eclipse) but as for the inspection cover, the dealer here cant even find a picture for it to get a part number for.

Xian if its possible, if you have these, could i get a price for overnight/express shipping, cause i really need these by saturday. Just let me know what you can do, and how much its all gonna run. Thanks!

Parts were pulled, checked, and cleaned up today. I'll let Xian work out the shipping details with you but they should be good to go.





Oh, and Verizon has the landline at the shop fully functional again BTW (217)485-5159. (The 800 number is still being re-routed/checked but is supposed to be tied back in shortly or well.)

Huge thanks travis!!!!! I hope i finally get this bad boy running this weekend, after 7+ months of being down!!!!