Added Parts:
(4) Stock 4G63 Cam Gears
(1) Stock oil filter housing
(1) 1G Dip stick and pipe
(1) Nearly new 1G Balance shaft belt (Approx 100 miles on this also)

Help my DSM cause guys - Buy some of these parts. Best offer on the real parts and I'll throw in a lot of the other general stuff for free.

Full set of stock size Mitsubishi rod bearings (Unused)
Set of stock size Mitsubishi main bearings (Less the thrust bearing)
Full set of new valve seals (Still in bag) - SOLD $5
Full set of ARP rod bolts (Still in package)
Set of four 780cc AMS disc type injectors (Freshly cleaned & balanced) - SOLD
Nearly new 4G63 timing belt (Approx. 100 miles on the belt) - SOLD $25
(2) Eibach 2.5" x 8" long 425# suspension springs for coil over set-up
(4) Stock 450cc Injectors
(1) Nice 1G stock intake painted black wrinkle finish
(4) Nearly new but rough .020 over Forged Ross pistons
(8) Stock 1G piston rods (All with used pistons)
(1) Stock Mitsubishi spark plug cover
(1) Stock 1G clutch line
(1) AC compressor with mount and tensioner bracket
(1) 1G Interior shift boot (with one small tear)
(1) Stock 2G heat shield for torbo/O2 housing (Good shape)
(1) 1G passenger side fan
(1) 1G Top and middle 1G timing belt cover
(1) 1G Power steering pump with mount and resevoir
(1) 1G Rear crank seal casting
(1) 1G Timing belt tensioner mounting bracket
(1) 1G Alternator adjustment bracket
(2) 1G Cross-engine coolant pipes (One without oil cooler connections) - SOLD $5 ea.
(1) 1G Battery box
(1) 1G dash bezel
(1) 1G Shift handle (The long one)
(1) 1G Center consol arm rest (Grey)
(1) 1G Stock Double Din radio/cassett player
(1) 1G Stock Double Din radio/cassett player
Misc. grey interior parts

Marcus

Would you happen to have an AWD Driver side front steering knuckle from a 1G W/O ABS?

give me a price and I'll take them

Can also be used as a backup Duhduhdildo!!!!!!!!!

No steering knuckle Taxi... I'll take $5 on the valve seals Mitsu90.

Yeah the uh shift handle is a little worn from use.

I can pick them up friday anytime after 4:00pm

Well I need a battery box but...

Would you happen to have a console pad for a 1G (the black piece that fits over top of the shifter and holds the little flip top box, ash tray, and coin holder)? I've already got a shift boot, just need the pad.

do you have a good condition headliner for ceiling with sun roof???

Just have yours redone gsxracer. I had mine recovered in black cloth here in Bloomington for $100 plus he repaired it after I broke most of the tabs off of it. Unfortunately, the shop I had do it is no longer there.

I am going to assume the Tbelt is Mitsu... If so PM a price

well, who else does a decent job repairing headliners???

Is it all torn up or does it just need to be glued back up? Shouldn't be too bad to cut a new one and glue it up.

$5 for this guy?

Turbohcar - I do have the black center consol you speak of, but it's for an auto. There is a performance shift button in place of the change holder on this unit.

GSXRacer - No headliner. But I had a guy in Bartonville do mine for $50 after I took it out for him. I think it was another $25 for the sun visors.

Natedogg - You just tell me which pipe you want for $5 and it's yours buddy!

Spyder - You have been PM'd

Hmmmm....are you going to be in the Bloomington area any time soon? Just thinking when I can make it over. I won't have a car starting this evening until I get the Talon going so....I guess if you won't be around I'll just have to PM you when I get it ready.

I'll take the one w/o oil cooler connections.

it's not all torn up yet... it is just all hanging down. mostly just drooping in the center, but a small peice of it has come loose on the edge near the sunroof.
I am sure that the day that my sunroof was left open in the rain didn't help any, but like I said, glad it's not torn yet.



what guy do you speak of... I might have to contact him upon my return... I figure that this winter will be a good time to get all of these loose ends all tied up since the GSX won't be on the road anyway.
does he use the factory material or does he use new???
and yes, my sun visors could use an overhaul while I am at it.
my drivers side visor mount has a crack in it and it doesn't seem to hang straight anymore, do you have a visor??? color doesn't matter if they are getting recovered anyway.


Ben

I think somebody just got solicited for an immoral act.

yo have anything else for an auto?

His fees have gone down.

What can I say... I'm 'Hard-Up'

Ben - I'll have to find the name uf the guy from Bartonville, I don't remember his name and I don't have any spare visors.

I don't have any other Automatic DSM parts either. Sorry.

How much for the injectors?

The 780cc Inectors were purchased for $380 from AMS. I'll take $240 obo. for them as is with a very strong recommendation that you have them cleaned and balanced or $300 obo. after they are cleaned and balanced. (only about 400miles on them as it is.)

you have any cams to go with them?

Sorry no cams. Spy or KOU can probably get those for you.

I have a set of stock cams I'll sell ya.