Hey guys I got this new version of mmcd, It's v1.8g. If you need this let me know. This version holds your peaks, It also has 4 bottom view screens instead of one. That means you can view 4 different parameters at once in digital mode. I haven't went through it all yet to see what else it has but that turned me on right there.
I'm trying to figure out how to post this so it's easier to get, But I don't know how. If someone can help me with that. It would be great.

CHANGELOG

KNOWN ISSUES:
Buttons/checkbox controls can cause delays in log sampling rate
mS timing uses a pretty awful hack - but it works

INVESTIGATION:
New Min/Max control when monitoring (current Peak is always MAX)
User defined prelog / postlog times (consider simple text entry)
Consider adding default Autolog triggers (TPS > 80%)
Consider adding default Alarm triggers (O2 / Knock)
Need to confirm Boost solenoid status display
Need to define/implement new log format (mS resolution / Integer / Long / Char )
SmartScan to scan slowly changing sensors once/sec
Consider having Reset button visible during Monitor-Paused
Consider adding 4 bar sensor used on some MAP gauges (need scaling info)

ROADMAP:
Convert to multi-segment project format
Finish Sensor config including alarms / scaling / graph
User defined scaling / graph scaling
Split custom sensors to separate dialog
New log format - header definition including scaling in external apps
Upload option in CSV format
8x sensor logic in second 4x panel
Intelliscan (scan slow sensors at slow rate)
Split graph scroll into multiple moves and peakECU to improve scan rates


15-4-05: V1.8g
- First-time-user testing identified a number of usability issues
- Changed large numeric so it comes up visible the first time MMCd is run on a new Palm device
- Need to set panel select to default sensor
- Set default selectedSensor = IDX_RPM to solve panel sensor select issue in 4X display
- Removed break from 4X display loop so it always shows 4 sensors - ready to config
- Display "-" on sensors that are not enabled for scanning
- Test and release

Just post the link to download it from.
Im interested.

Or email it to me and Ill host it on my site.

I got this on cd when I bought my new logger cable. So I have no link, I will need an email address so I can attach this file. I can't do it through the DSM Central email assitance.

I found a place to host it. And here it is: http://www.streamload.com/BudmannG

Got it. Now if my logger will sync. Sending screenshots now.

Just put this on my IBM C500 I just got. Seems to work OK. I'll test it on the car with an original BudmannG cable this weekend! Any tricks to help a newbie out?

Thanks!

Just make sure to unpause it for it to work (no check). And if you want to log make sure it has got a check in the box.
There are only a few thing that you want to log. All your fuel trims, RPM, Knock. I'm sure there are others but I can't think of them right now, LOL.
Any problems post back up.

Thanks for the advice. I'll let everyone know how it goes!