I got a autometer pressure gage to hook up. Since the engine failure I no longer trust the stock gage.

Are the threads for the stock gage normal NPT or the metric NPT??

Also, I remember reading somewhere to remote mount the sending unit to make it live longer. Since I window welded the stock mounts and removed the balance shafts, vibration is going to be an issue. Anybody got any recommendation (picts would be good) of where/how they mounted theirs?

I'd be interested in the answers you get, as I have a gauge to put in also. Is yours electrical or mechanical?

I believe there's a FAQ on DSMTuners on how to do it but their site is currently down. LMK what you find out.

AWD DSM 1
Electrical

Turbocar
That may be where I saw it, but I couldn't check. I'll try this weekend.

Here's a little bit I found link1

Here's a nice article on adding a external oil cooler
link2

Still looking...

Here's an article on remote mounting a dual sensor setup (on a Mustang) link3

Well according to a thread I found on Buschur Forums, the threads are 1/8-28 BSP, not the standard 1/8-27 NPT.

So, anybody know somewhere I can get male BSP to NPT fitting locally (Peoria)??

AutoZone sells a AutoMeter kit thats got metric fittings in it, One of the fittings in the kit fits our cars.

You beat me to the post...I stopped at Advance and they ordered me an adapter set. Something like 6 fittings for $7. It comes in Friday.

I should have got a kit also. Now I will be waiting around for mine to come in. Stupid me!

Advance in E Peoria should have one in stock. They ordered 2 and was going to put the other on the shelf. It's made by SunPro.

Hey Chris, Is this the kit that you bought? http://www.sunpro.com/product_detail.php?p...f4cdc3a0a9d6cb7

Yep...$6.96 Item #4559720 at Advance

Thanks man!