Full Version: new cams. idle problem
you didn't set your timing correctly.
Did you ground out the timing plug (taking the ecu out of the picture) when you set the idle?
I still don't think your cams are set correctly.
I've got an IC setup if you want one. Supra SMIC (good for 400hp), 2.5in IC piping w/ custom Mitsu housing J-pipe, GM MAFT, and Turbo XS BOV (good for 25psi). PM me with info.
You still want that radio too? I've still got it if so.
You still want that radio too? I've still got it if so.
QUOTE (turboxtasy @ May 31 2006, 12:32 PM)
i alresayd bougth a fmic. i just need to run the piping thanks thought. and yea i still need the radio.
Usually I'm not one to bitch about proofreading posts, but damn man!
Damn, and all of this right after Rob just posted that DSMCentral is about the cars not the drama in another thread... 
I have no inclination to even continue to offer help or care in the slightest when windell has repeatedly been asked to clean up his posts. It's painful to even attempt to decipher.
QUOTE (turboxtasy @ May 31 2006, 03:03 PM)
I just sent you a text message dan.
First and foremost. The axle was indeed broke. You can pm whitegsr on css and he will contest. If you dont belive me come to my work i will show you the invoice. I did not come here to be discredited. My car was running poorly and i needed some help. Thi is in fact one of the most bs things i have seen form this site. Along with the cams i also put in bigger injectors and i fixed the rattle coming form under the car which you dsm mechanics couldnt figure out was the fact the rear calipers were assembled without putting the brake pad clips on. I cannot believe what i am reading coming from you spy. Acting like putting cams in a car is such a big deal. I built that whole motor in the integra from start to finish and buying a set of used cams from dsm tuners and putting them in is such a huge feat to me? I know what im doing just becuz i ask for help doesnt mean im not capable. But dotn worry about it. This is the last time i ask for assistance, since it does nothing but shoot me down. Maybe i can get ahold of KOU and have him do all my work becuase right now he seems to be a more standup guy.
First and foremost. The axle was indeed broke. You can pm whitegsr on css and he will contest. If you dont belive me come to my work i will show you the invoice. I did not come here to be discredited. My car was running poorly and i needed some help. Thi is in fact one of the most bs things i have seen form this site. Along with the cams i also put in bigger injectors and i fixed the rattle coming form under the car which you dsm mechanics couldnt figure out was the fact the rear calipers were assembled without putting the brake pad clips on. I cannot believe what i am reading coming from you spy. Acting like putting cams in a car is such a big deal. I built that whole motor in the integra from start to finish and buying a set of used cams from dsm tuners and putting them in is such a huge feat to me? I know what im doing just becuz i ask for help doesnt mean im not capable. But dotn worry about it. This is the last time i ask for assistance, since it does nothing but shoot me down. Maybe i can get ahold of KOU and have him do all my work becuase right now he seems to be a more standup guy.
Maybe the two of you could find comfort in each other's company... talking like that isn't going to get you far here.
I'm curious of something. Earlier in this thread, Windell, you mentioned that your rings are perfectly fine, yet you blow out your dipstick constantly. Now, correct me if I'm wrong, but such a problem is caused by blowby through the rings, is it not?
Right. I understand that. But it's one of two things: weak dipstick seal or weak rings. Good rings blow out a weak dipstick and bad rings blow out a good dipstick. I was just asking a question to see if he was indeed having a problem with his rings or not.
THIS SITE? Are you implying that this site as a whole sucks or are you just exajerating to flame the flamers? Try keeping it to the subject and about the subject Windell.
BTW - I would be more than suprised if you put cams in the GST without so much as asking one question until after they were installed. Anyone can learn this stuff and that's great if you got it done.
BTW - If you are going to try to dramatize this site, you will be shortlived here.
BTW - I would be more than suprised if you put cams in the GST without so much as asking one question until after they were installed. Anyone can learn this stuff and that's great if you got it done.
BTW - If you are going to try to dramatize this site, you will be shortlived here.
QUOTE (The Iron Goat @ Jun 1 2006, 12:08 AM)
I'm curious of something. Earlier in this thread, Windell, you mentioned that your rings are perfectly fine, yet you blow out your dipstick constantly. Now, correct me if I'm wrong, but such a problem is caused by blowby through the rings, is it not?
He could need krank vents
Or
Windell what kind of lube did you use on the cams when you installed them? I've heard that cams sticking can cause odd backpressure leading to high crankcase pressure and blowing out (or "poped" out) oil dip sticks.
typical drama from a honda guy!!!! He already gave up and is selling it for another ssssslllllloooooooowwwwww honda. Guess they'll never learn.
<--- Slo-Pny
Who gave this kid a license to reproduce????
Who gave this kid a license to reproduce????
If there is a God I'm sure he didn't! Windell must be laying pipe under the radar
anyone notice there is no mention of hks cams in the ad?
i'd definitely consider that an asset when selling the car
i'd definitely consider that an asset when selling the car
I see in your sig that you have 950's, witch is completely uncontrollable with a SAFC. Did you buy a AEM, or DSM LINK? Not to mention to that feed that big of an injector you need a twin Walbro set up with -8 line from the tank to the fuel rail. Don't forget a FPR that can regulate the amount of fuel that that system will provide. How ever with you current mods if you have that big of a fuel system you could run you car on Alky. I think that it would be very very hard to tune with a autometer a/f gauge, must have bought a wideband eh? If you didn't you may want to invest in one. No doubt Wendy, with these mods you should be in the 9's!!
Whatever your smoking....please don't hoard it!!! 
Thank God it's Friday... Spy won't have to go to the looney bin till monday now.
Windell no car seat for das babenziedeutches in the back seat of the dsm?
QUOTE (spyonu2007 @ Jun 2 2006, 07:43 AM)
Im running 1000cc injectors on a single 255lph hp. Im also running on some Coors light, no need for gasoline anymore.
On the way to work, I activated my rocket pack and made a quick quartermile run on the moon.
While I was up there, I stole the soviet flag and sold it on ebay for a billion dollars.
I then found a martain woman that was stranded up there, because her race car/ spaceship ("its a dodge") had thrown its hyperdrive.
We hooked up and I had a plethera of mutant babies.
One of them seems to heal fast, another has laser vision, and another is cold as ice... They are cool kids... Im going to teach them the arts of ninjitsu and start a war with mars for letting that crazzy martian babe seduce me and steal my rocket car.
And then, Im going to grow wings and fly out a 30 storie window and blaze over to Mr. Rogers neighbor hood and beat up Mr. Rogers beacuse his trolly is slower than my rocket car.
On the way to work, I activated my rocket pack and made a quick quartermile run on the moon.
While I was up there, I stole the soviet flag and sold it on ebay for a billion dollars.
I then found a martain woman that was stranded up there, because her race car/ spaceship ("its a dodge") had thrown its hyperdrive.
We hooked up and I had a plethera of mutant babies.
One of them seems to heal fast, another has laser vision, and another is cold as ice... They are cool kids... Im going to teach them the arts of ninjitsu and start a war with mars for letting that crazzy martian babe seduce me and steal my rocket car.
And then, Im going to grow wings and fly out a 30 storie window and blaze over to Mr. Rogers neighbor hood and beat up Mr. Rogers beacuse his trolly is slower than my rocket car.
spy, did you fall asleep at the movie theater by chance???
we're not gonna be listening to xmen shit for the next couple months are we? sorta like on cii with dp and his matrix style posts
That didn't take long. 
Spynancing term completed then heh?
QUOTE (spyonu2007 @ Jun 6 2006, 06:20 PM)
Wendy has completed two spynancing agreements. I never bat an eye at it, every 14th the money is there. No questions asked.
Could almost set my watch by it.
Could almost set my watch by it.
I set my watch by the daily fibs he tells.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.