Well today I started working on the rear end of the car. I need to install the new rear end which includes the new differential and axles. The problem was that the orginal owner broke the rearend and couldn't get the axles out of the hub. So they cut the orginal axles as much as they could and left them in the hub. So I am trying to get the axle out of the hub. I got the hubs removed and now will be taking them to a friends to try and press the old axles out. That is about all the progress I made on the car.

Lube, heat, air hammer.

Well we are trying a 60 ton press today, if that don't work might be buying new hubs. I did get a little more done on the car. Got the front cover back on and mounted the solenoid for the boost controller in a better location. I think I might get the balance shaft belt on and keep waiting for the new head to come in.