Dakota_DSM
Sep 3 2008, 10:11 PM
Well I know I said I wasn't going to sell my GST but it is going to happen... As of tomorrow I will no longer own it... A friend of mine is buying it off of me.
So as of Sunday this will be my new ride...
1990 Eagle Talon TSI AWD 6/4
155k on the body
15k on rebuilt motor and trans
HKS bov
custom 3 inch turbo back with magnaflow muffler
2 gauges and pillar pod (air fuel, boost)
new brake lines
cd player
short throw shifter
act 2100 clutch
It needs some little stuff here and there but nothing I can't handle.


spyonu2007
Sep 3 2008, 10:22 PM
very nice car.. I think you should hold some record for the amount of Xdsmcentral owners cars, you yourself has owned.
Dakota_DSM
Sep 3 2008, 11:02 PM
QUOTE (Dan Boles @ Sep 3 2008, 10:22 PM)
very nice car.. I think you should hold some record for the amount of Xdsm owners cars, you yourself has owned.
Haha just 2... All the others were stockers that were never modded until I bought them...
awd4kicks
Sep 4 2008, 05:57 AM
I definitely like the move to AWD drive.
I think you may take the crown from Rob Herrick for changing cars more often than underware though!
JMoushon
Sep 4 2008, 07:21 AM
Take it to Vicary Day!!! Should run low 14's on stock boost, and if you've got the fuel to turn it up, 13's all day. Looks just like mine
Dakota_DSM
Sep 4 2008, 08:15 AM
QUOTE (awd4kicks @ Sep 4 2008, 05:57 AM)
I definitely like the move to AWD drive.
I think you may take the crown from Rob Herrick for changing cars more often than underware though!

haha I have had a few... This will be my 8th car lol
Dakota_DSM
Sep 4 2008, 09:32 AM
QUOTE (JMoushon @ Sep 4 2008, 07:21 AM)
Take it to Vicary Day!!! Should run low 14's on stock boost, and if you've got the fuel to turn it up, 13's all day. Looks just like mine

If everything is working fine and I learn how to launch it then I will lol...
JMoushon
Sep 4 2008, 01:24 PM
Launching a near-stock AWD is very easy... 5500 and let out the clutch fast. Don't dump it, but don't slip it too much. Also, don't practice too many times in a row, that 2100 will fry. Always allow it to cool down. My first time launching my '91 I cut a 1.81 60' on stock boost and a stock clutch. But, that's like my 6th AWD DSM...
Dakota_DSM
Sep 4 2008, 01:55 PM
QUOTE (JMoushon @ Sep 4 2008, 01:24 PM)
Launching a near-stock AWD is very easy... 5500 and let out the clutch fast. Don't dump it, but don't slip it too much. Also, don't practice too many times in a row, that 2100 will fry. Always allow it to cool down. My first time launching my '91 I cut a 1.81 60' on stock boost and a stock clutch. But, that's like my 6th AWD DSM...
Thanks for the advice..
SCCA Stang
Sep 4 2008, 04:33 PM
the launch is where I won the majority of my winning races in my GSX... and if I couldn't get them out of the hole, I finished them off in 3rd gear...
treydawgs4g63T
Sep 4 2008, 09:34 PM
still doesnt top off my 13 DSM's in 3 years though. hahah, im KING.
spyonu2007
Sep 4 2008, 09:55 PM
over 20
Dakota_DSM
Sep 5 2008, 04:15 PM
QUOTE (treydawgs4g63T @ Sep 4 2008, 09:34 PM)
still doesnt top off my 13 DSM's in 3 years though. hahah, im KING.
Haha lol I don't think I will ever beat your record lol
Dakota_DSM
Sep 5 2008, 04:23 PM
I am bored so here's a few more pics...






I have a few parts ready for it...
2g throttle body elbow
2g exhaust manifold
2g mas (need to do some research first)
my valve cover, oil cap, spark plug cover.
and the 2g gst wheels...
mitsu90
Sep 5 2008, 04:32 PM
that makes me miss my blue/silver 1g..
when you get ready to sell it let me know
Dakota_DSM
Sep 5 2008, 04:40 PM
QUOTE (mitsu90 @ Sep 5 2008, 04:32 PM)
that makes me miss my blue/silver 1g..
when you get ready to sell it let me know

Will do

lol... I am going to try and hold on to this one at least until next summer and maybe by then it will be modded enough to keep me happy so I don't sell it... But if I do sell it I am getting a MK3 supra... I was going to go ahead and buy one now but I decided against it...
93dsmowner
Sep 5 2008, 05:13 PM
Lol.
I'm looking at a new ride as well.
Dakota_DSM
Sep 5 2008, 06:08 PM
QUOTE (93dsmowner @ Sep 5 2008, 05:13 PM)
Lol.
I'm looking at a new ride as well.

What would that be?
93dsmowner
Sep 5 2008, 09:00 PM
Talon TSI AWD.
My dad's buddy owns it. He said it's not necessarily pretty, but it's just stupid fast.
He's ridden in all kinds of ridiculous drag cars so I'm sure this thing is quick.

No clue on year. Just know it's been owned by a middle-aged guy who did a ton of maintenance and took care of it. He's selling it because he's bored of it. Then again, he has a 900hp Duramax and a Lancer Evolution....
We'll see. I have to come up with $500 somehow...
Kazz5
Sep 5 2008, 09:25 PM
Definitely one of the better looking DSM models. But drop that damn thing a few inches, eh?
93dsmowner
Sep 5 2008, 10:13 PM
Kazz is onto something.
Dakota_DSM
Sep 6 2008, 01:31 PM
Haha I will drop it sooner or later... But not much I hate scraping on every little thing...
It has a problem he said it gets a little hotter then it should.. So I am going to have to try and get that fixed and then I am picking up a mbc, logger, and afc... And then it's LS1 killing time
JMoushon
Sep 8 2008, 01:16 PM
QUOTE (Dakota_DSM @ Sep 6 2008, 01:31 PM)
Haha I will drop it sooner or later... But not much I hate scraping on every little thing...
It has a problem he said it gets a little hotter then it should.. So I am going to have to try and get that fixed and then I am picking up a mbc, logger, and afc... And then it's LS1 killing time

I hope you're going after stock automatics... I'd still be skurred of the Ellis Juan until you're solidly in the 12s.
awd4kicks
Sep 8 2008, 02:21 PM
I beat down LS1's when I was running mid to low 13's. There are some bad LS1's out there, but don't be afraid to lay the smack-down when you get the chance.
JMoushon
Sep 8 2008, 04:32 PM
QUOTE (awd4kicks @ Sep 8 2008, 02:21 PM)
I beat down LS1's when I was running mid to low 13's. There are some bad LS1's out there, but don't be afraid to lay the smack-down when you get the chance.
I agree with your statement. However, it seems like 90% of my impromptu fun was had from a roll, and I don't see a mild bolt-on AWD being able to hang with the LSX cars. I'm all for the attempt though!
awd4kicks
Sep 8 2008, 07:36 PM
Maybe not a 'bolt-on' DSM, but I know I had a good race with at least one LS TA from a stop light. It is a guy that used to work at Daxcon with Darryl. He used to have a Blue TA and take it to Cordova with us. I'm not saying it wasn't close, but he was at least half to one car behind me and couldn't come around. Ahhh...the good ol days!
93dsmowner
Sep 8 2008, 08:50 PM
All this talk of LS-killing has me pumped.
The car I mentioned is a 92 TSI AWD. Maroon,red, whatever. Same as my buddy's. Has 7 bolt in it though... but 4 bolt rear. Evo III 16G. Been maintained really well. Socketed ECU and Chip burner with the software, wideband O2 sensor... all sorts.
For $1000. Only need another $450 so I can buy it including tax title license...
Dakota_DSM
Sep 8 2008, 10:20 PM
QUOTE (JMoushon @ Sep 8 2008, 01:16 PM)
QUOTE (Dakota_DSM @ Sep 6 2008, 01:31 PM)
Haha I will drop it sooner or later... But not much I hate scraping on every little thing...
It has a problem he said it gets a little hotter then it should.. So I am going to have to try and get that fixed and then I am picking up a mbc, logger, and afc... And then it's LS1 killing time

I hope you're going after stock automatics... I'd still be skurred of the Ellis Juan until you're solidly in the 12s.
I didn't have a problem keeping up with one when my GST was 100% stock...
awd4kicks
Sep 9 2008, 06:09 AM
Until traction becomes a real issue, a GST on a roll is a LOT faster than an AWD on a roll with comparable mods. Nothing will beat an AWD on a street launch, except for a Formidable RWD car with 24" wide tires on the back (But that's another story).
JMoushon
Sep 9 2008, 06:18 AM
QUOTE (Dakota_DSM @ Sep 8 2008, 10:20 PM)
QUOTE (JMoushon @ Sep 8 2008, 01:16 PM)
QUOTE (Dakota_DSM @ Sep 6 2008, 01:31 PM)
Haha I will drop it sooner or later... But not much I hate scraping on every little thing...
It has a problem he said it gets a little hotter then it should.. So I am going to have to try and get that fixed and then I am picking up a mbc, logger, and afc... And then it's LS1 killing time

I hope you're going after stock automatics... I'd still be skurred of the Ellis Juan until you're solidly in the 12s.
I didn't have a problem keeping up with one when my GST was 100% stock...
The auto cars with the 2.73 gear are about the slowest of them.
But a t25 auto still should have gotten killed, regardless of boost level.
I'm all for the 4 cylinder performance, but don't base the performance of a type of car on a snapshot developed from 1 experience. I promise you, if you raced a standing 1/4 against 10 stock LS1 cars in your white car, you'd lose 9 times and on the tenth the other guys motor blows up.
Don't roll your eyes at me son
JMoushon
Sep 9 2008, 06:20 AM
QUOTE (93dsmowner @ Sep 8 2008, 08:50 PM)
All this talk of LS-killing has me pumped.
The car I mentioned is a 92 TSI AWD. Maroon,red, whatever. Same as my buddy's. Has 7 bolt in it though... but 4 bolt rear. Evo III 16G. Been maintained really well. Socketed ECU and Chip burner with the software, wideband O2 sensor... all sorts.
For $1000. Only need another $450 so I can buy it including tax title license...
Not certain where you came across a 7 bolt '92, but I'd be wary.
Dakota_DSM
Sep 9 2008, 07:41 AM
QUOTE (JMoushon @ Sep 9 2008, 06:20 AM)
QUOTE (93dsmowner @ Sep 8 2008, 08:50 PM)
All this talk of LS-killing has me pumped.
The car I mentioned is a 92 TSI AWD. Maroon,red, whatever. Same as my buddy's. Has 7 bolt in it though... but 4 bolt rear. Evo III 16G. Been maintained really well. Socketed ECU and Chip burner with the software, wideband O2 sensor... all sorts.
For $1000. Only need another $450 so I can buy it including tax title license...
Not certain where you came across a 7 bolt '92, but I'd be wary.
I am pretty sure some of the later 92's had 7bolts...
spyonu2007
Sep 9 2008, 09:09 AM
All this talk about destroying ls1's.... sure wets my whistle... Wonder how a lowly lt1 will do against one of these formidable fwd/awd modded dsm's?
awd4kicks
Sep 9 2008, 12:07 PM
I don't agree with Moushon on this one for the most part. Phuk LS1's (Although I love the engines). Unless it's been pulled out of the car and worked over or had a power adder put on (Or put in a 3rd gen RX7).
I think we are discussing the 1G AWD with a 14b and it's ability to run with LS1 cars. I wouldn't even hesitate running them biatches with a free modded and bolt-on 1G AWD DSM. I'm not saying you will win as many as you lose, but it will be close if you can get your junk into the mid to low 13's (Not impossible at all).
LS1's... Bah!
LT1's... Even slower!
black92_tsi_awd
Sep 9 2008, 01:52 PM
I'm pretty sure I know a 1g AWD with a 14b that could run with them...
I beleive april is the cutoff for 6 bolt 92's....mines an April Bbday
spyonu2007
Sep 9 2008, 03:09 PM
Holds tongue until motor is tuned...
But Im looking forward to snacking on some dsm salad.
93dsmowner
Sep 9 2008, 04:53 PM
Yeah, first part of the year is the 6 bolt. Second half is the 7.
I have a 6 bolt motor to put in should this 7 bolt walk on me.
awd4kicks
Sep 10 2008, 06:10 AM
QUOTE (Dan Boles @ Sep 9 2008, 03:09 PM)
All this talk about destroying ls1's.... sure wets my whistle... Wonder how a lowly lt1 will do against one of these formidable fwd/awd modded dsm's?
Calling that Frankenstiened power plant an LT1 is like calling Carters engine an LS1.
JMoushon
Sep 10 2008, 09:37 AM
OK, I'll defer to the majority on this one. Take'em down! If you take it to Vday, I'll have 2 stangs there that you can try your luck with

(if I get the other one done... and find a driver) Oh hell, you can have a piece of my 91 AWD as well!
I really need a track day.
spyonu2007
Sep 10 2008, 10:42 AM
QUOTE (awd4kicks @ Sep 10 2008, 06:10 AM)
QUOTE (Dan Boles @ Sep 9 2008, 03:09 PM)
All this talk about destroying ls1's.... sure wets my whistle... Wonder how a lowly lt1 will do against one of these formidable fwd/awd modded dsm's?
Calling that Frankenstiened power plant an LT1 is like calling Carters engine an LS1.
I know not what you mean kind sir... My lt1 can barely maintain pace with a bolt on evo. Should be no match for any 4g63t on this site.
Dakota_DSM
Sep 10 2008, 01:21 PM
QUOTE (93dsmowner @ Sep 9 2008, 04:53 PM)
Yeah, first part of the year is the 6 bolt. Second half is the 7.
I have a 6 bolt motor to put in should this 7 bolt walk on me.

It's a 1g 7bot so don't worry about it...
93dsmowner
Sep 10 2008, 01:30 PM
The 1G 7 bolts don't walk? I always thought all 7 bolts walked....
If it's only a 2G problem then yay for me.
JMoushon
Sep 10 2008, 03:58 PM
All 7 bolts walk, it was just more prevalent in the 2g cars. Ragardless, a few reputable shops say the 7 bolts are the superior engine once the crankwalk issue is sorted.
awd4kicks
Sep 10 2008, 05:26 PM
QUOTE (Dan Boles @ Sep 10 2008, 04:42 PM)
QUOTE (awd4kicks @ Sep 10 2008, 06:10 AM)
QUOTE (Dan Boles @ Sep 9 2008, 03:09 PM)
All this talk about destroying ls1's.... sure wets my whistle... Wonder how a lowly lt1 will do against one of these formidable fwd/awd modded dsm's?
Calling that Frankenstiened power plant an LT1 is like calling Carters engine an LS1.
I know not what you mean kind sir... My lt1 can barely maintain pace with a bolt on evo. Should be no match for any 4g63t on this site.
Oh my bad.
Dakota_DSM
Sep 10 2008, 05:43 PM
QUOTE (JMoushon @ Sep 10 2008, 03:58 PM)
All 7 bolts walk, it was just more prevalent in the 2g cars. Ragardless, a few reputable shops say the 7 bolts are the superior engine once the crankwalk issue is sorted.
Well in that case... Every engine can walk
93dsmowner
Sep 10 2008, 05:46 PM
Alright. I wanted to be sure. Guess I'll just keep an eye on it.
kapoosh
Sep 10 2008, 11:25 PM
QUOTE (Dan Boles @ Sep 9 2008, 03:09 PM)
I know not what you mean kind sir... My lt1 can barely maintain pace with a bolt on evo. Should be no match for any 4g63t on this site.

Hopefully it stays that way
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.