Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> engine swap, swaping in a 2.0 where a 1.8 was
luckylindy
post Apr 22 2003, 07:05 PM
Post #1


Newbie


Group: Members
Posts: 1
Joined: 22-April 03
Member No.: 118



Can anyone tell me what all is needed to put a 2.0 non turbo where a 1.8 was. Besides the engine and trans what is needed. Any wiring harnesses Hubs etc???
Go to the top of the page
 
+Quote Post
akamiami
post Apr 22 2003, 07:49 PM
Post #2


Eats and sleeps DSM jargin.
******

Group: Moderators
Posts: 1,156
Joined: 23-September 02
Member No.: 16



The 1.8's had a distributor (at least the Galant 1.8 did that I worked on), so you'll need to get the complete engine wiring harness as well as the ECU. Probably the downpipe, exhaust manifold, motor mounts, halfshafts, solenoids, and emissions devices too. I'd just grab what you can all at once and you won't have to go search for oddball parts when you're nearly done.


--------------------
my cars breath smells like car food
Go to the top of the page
 
+Quote Post
90GSX
post Apr 22 2003, 10:41 PM
Post #3


DSMCentral Freak
****

Group: Validating
Posts: 365
Joined: 3-January 03
From: Mt. Sterling, IL
Member No.: 60



I attempted to do this one, it was a big pain and i didnt have the patience so i gave up. unsure.gif But what i do know is the auto trannys are exactly the same, and shafts are the same. You need to swap ecu and harness, exhaust pipe is the same i believe. The fuel line, throttle cables and AC are different. The air intake hose and filter are slightly different and the heater hoses and hoses to the radiatior are different. The top motor mount on the pully side is the only one thats different i do believe. Other than that, you just have little things on the firewall that need changed too, im not even sure what they are. I just noticed them on my 2.0 eclipse that werent on my 1.8 laser. Thats about all i know about doing the swap. I did manage to pull my 2.0 out but tore up alot of stuff to do it. I decided it wasnt worth it, cause if it wouldnt start, you would have so much crap to go back and check that it would just be too much of a headache to do. I do promise though that the auto trannys are the same, cause i successfully swapped them with no problems. So you wouldnt have to mess with hubs, shafts, and a new tranny.

Kris was right, they have a distributer. Cost me 200 bucks for a rebuilt one cause the housing broke on mine trying to remove it, all because a stupid shear pin broke. mad.gif


--------------------
2005 Mitsubishi Eclipse GS- Pretty daily driver
---------------------------------------
1990 Mitsubishi Eclipse GSX- Traded in, buhbye little buddy
1994 Plymouth Laser- 1.8 auto.
1994 Mitsubishi Eclipse- GS auto. RIP 12/5/02
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 20th November 2026 - 11:18 AM
Design by: IPB Download & eBusiness Discussions