Nov 26 2005, 05:46 PM
Post
#1
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
Got all the bad gas out of the new AWD. It is now running 110 octane. Changed the injectors and that helped smooth it out some.
Some of the problems now....will not rev past 6300 and takes a while to get there. It does not bounce off of a rev limiter it just won't go any higher......there is a loud POP coming from somewhere under the hood, can't tell if it is coming from near the intake or the IC. It you can feel it through the UICP and the sound seems to move. You have to hold the gas to the floor for it to start. We were thinking maybe bad fuel pump and/or filters??? When it does idle it sounds fine except for a hiccup every now and then that almost sounds like when your A/C kicks on. When you try to drive it you have to floor the gas and it seems to have no power and wants to go nowhere. Possible boost leak? Things we need.......Timing Belt (looks like swiss cheese), logger, and somebody with a little more knowledge.........Nate, Marcus, Kris -------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
![]() |
Nov 26 2005, 06:33 PM
Post
#2
|
|
![]() DSMCentral Freak ![]() ![]() ![]() ![]() Group: Validating Posts: 365 Joined: 3-January 03 From: Mt. Sterling, IL Member No.: 60 |
Sounds like the timing may be off. As for the timing belt looking like swiss cheese, i wouldnt run it again till you replace that or your gonna end up creating an even bigger problem.
-------------------- 2005 Mitsubishi Eclipse GS- Pretty daily driver
--------------------------------------- 1990 Mitsubishi Eclipse GSX- Traded in, buhbye little buddy 1994 Plymouth Laser- 1.8 auto. 1994 Mitsubishi Eclipse- GS auto. RIP 12/5/02 |
|
|
|
Nov 26 2005, 07:54 PM
Post
#3
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
QUOTE (spyonu2007 @ Nov 26 2005, 07:37 PM) Man... thats a shitty deal. Who sold you that gem? some douch bag -------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
Nov 26 2005, 08:01 PM
Post
#4
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
screw his finger were going a little lower
-------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
Nov 26 2005, 08:06 PM
Post
#5
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
well you should have I think you should buy me a new one.
-------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
Nov 26 2005, 09:00 PM
Post
#6
|
|
|
DSM Tech Wizard ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2,404 Joined: 16-December 03 From: Fletcher/Bloomington Member No.: 214 |
Timing is more than likely the cause of your problems. Make sure the timing marks on the cams and the timing mark on the crank are all in the right spot at TDC. Replace that timing belt (and the tensioner while you're at it) and put the timing light on it. You should be good after that.
-------------------- "I hear he tunes the space shuttle also...and that thing is fast"
|
|
|
|
Nov 26 2005, 11:27 PM
Post
#7
|
|
|
Person of Wisdom ![]() ![]() ![]() Group: Members Posts: 177 Joined: 14-January 03 From: Bloomington Member No.: 66 |
if I still have it, you are more than welcome to my timing belt. I can not confirm that it is new, however, it is in great shape as it came off a motor that was built but never fired.
|
|
|
|
Nov 26 2005, 11:32 PM
Post
#8
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
QUOTE (badbu68 @ Nov 26 2005, 11:27 PM) if I still have it, you are more than welcome to my timing belt. I can not confirm that it is new, however, it is in great shape as it came off a motor that was built but never fired. how much and where you located? dose any one haver a good timming light I could borrow tomarrow? -------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
Nov 27 2005, 08:56 AM
Post
#9
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,108 Joined: 2-October 05 From: Waverly, Illinois Member No.: 636 |
Hey mitsu90 I found this on ebay - http://cgi.ebay.com/ebaymotors/Timing-Belt...sspagenameZWDVW
-------------------- |
|
|
|
Nov 27 2005, 09:35 AM
Post
#10
|
|
![]() DSMCentral Freak ![]() ![]() ![]() ![]() Group: Validating Posts: 365 Joined: 3-January 03 From: Mt. Sterling, IL Member No.: 60 |
If you have high miles, i would replace the tensioner pully and idler pully for some insurance. You can get them on machv for like 20-30 bucks each.
Ive done 3 timing belts, and i bought all mine through oreillys for like 45 bucks and havent had any problems. But most do recommend going OEM, im not sure how much they run at the dealer -------------------- 2005 Mitsubishi Eclipse GS- Pretty daily driver
--------------------------------------- 1990 Mitsubishi Eclipse GSX- Traded in, buhbye little buddy 1994 Plymouth Laser- 1.8 auto. 1994 Mitsubishi Eclipse- GS auto. RIP 12/5/02 |
|
|
|
Nov 27 2005, 01:50 PM
Post
#11
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
anyone want to lend a hand changing a timing belt?
-------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
Nov 27 2005, 04:20 PM
Post
#12
|
|
![]() Zen Master DSM ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Moderators Posts: 3,008 Joined: 10-January 01 From: in front of you Member No.: 5 |
|
|
|
|
Nov 27 2005, 05:06 PM
Post
#13
|
|
![]() Person of Wisdom ![]() ![]() ![]() Group: Members Posts: 110 Joined: 5-May 03 From: Granite City, IL Member No.: 128 |
yeah, id get all new parts man. then youll have peace of mind for a good 75K miles.
-------------------- Drew Taylor; 1992 Eagle Talon TSi AWD
![]() |
|
|
|
Nov 27 2005, 09:10 PM
Post
#14
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
QUOTE (natedogg @ Nov 27 2005, 04:20 PM) I think I will just take it to a garage to have it replaced. -------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
Nov 27 2005, 09:59 PM
Post
#15
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
well got the timing set, still didn't want to run for sh!t
-------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
Nov 27 2005, 10:02 PM
Post
#16
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,108 Joined: 2-October 05 From: Waverly, Illinois Member No.: 636 |
Good deal man. Glad to see someones getting something done on there DSM
-------------------- |
|
|
|
Nov 27 2005, 10:06 PM
Post
#17
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
I do have one other question. the FPR on the is M/T 36.3psi, and on the A/T 42.7psi would I gain anyting by swapping them ?
-------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
Nov 28 2005, 01:07 PM
Post
#18
|
|
|
DSMCentral Godfather ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Admin Posts: 3,823 Joined: 10-January 01 From: Washburn Member No.: 26 |
If you have the larger injectors then you more than likely do not need more fuel pressure. Obviously that decision can be best made after logging the engine. I'd hold off until then.
-------------------- In Loving memory of David T Crebo
Greatness comes from the most unexpected places! ![]() |
|
|
|
Nov 28 2005, 02:46 PM
Post
#19
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
just stock injectors. this car is bone stock, it's still got and air can.
-------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
Nov 28 2005, 02:57 PM
Post
#20
|
|
|
DSM Tech Wizard ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2,256 Joined: 10-January 01 From: central IL Member No.: 10 |
QUOTE (mitsu90 @ Nov 27 2005, 10:10 PM) I think I will just take it to a garage to have it replaced. Be careful which garage you take it too. I've heard more stories about garage screwing up timing belts and not fessing up than I care to think about. I'd be happy to help or even do it for you, but I won't have any time until well after the first of the year... -------------------- The fastest car I own is a minivan....
|
|
|
|
Nov 28 2005, 03:01 PM
Post
#21
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
QUOTE (AWD DSM 1 @ Nov 28 2005, 02:57 PM) I'd be happy to help or even do it for you, but I won't have any time until well after the first of the year... not sure when I will get one, but I will take you up on the help offer if your free when I do get it. -------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
Nov 29 2005, 03:09 PM
Post
#22
|
|
![]() Post Master ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 780 Joined: 14-July 04 Member No.: 338 |
QUOTE (AWD DSM 1 @ Nov 28 2005, 02:57 PM) Be careful which garage you take it too. I've heard more stories about garage screwing up timing belts and not fessing up than I care to think about. I can give personal testimony to a shop absolutely screwing up the job and overcharging me for it as well. Once I got the car back and fixed the problems myself, I realized how easy it actually is to change that belt. It's a pain, no doubt, but nothing overly complicated. Don't be skurrred! Oh, the shop that "fixed" my car didn't know to sync the balance shaft behind the oil pump pully. It made for some nasty vibes and an exploded crank pully assembly. -------------------- QUOTE (gsxracer80 @ Oct 31 2006, 12:41 AM)
thanks hcar.... I am still massaging that area trying to get it ready... ![]() |
|
|
|
Nov 29 2005, 03:24 PM
Post
#23
|
|
![]() DSMCentral Freak ![]() ![]() ![]() ![]() Group: Validating Posts: 365 Joined: 3-January 03 From: Mt. Sterling, IL Member No.: 60 |
I can attest to it not being that difficult. Ive gone through it countless times (and a new head) on my gsx before i got it right. If your doing it by yourself, its 100x easier if you get the timing belt tensioner tool. Its like 20 bucks if i remember right. The hardest thing about it was getting the stupid plastic cover off, gotta get a bit creative on which sockets you use to get to some of the bolts. And remember to loosen the water pump pully bolts BEFORE taking the belts off. Other than that, get the parts you need and its not too bad. I can get it tore down and back together in an hour after doing it a dozen times.
-------------------- 2005 Mitsubishi Eclipse GS- Pretty daily driver
--------------------------------------- 1990 Mitsubishi Eclipse GSX- Traded in, buhbye little buddy 1994 Plymouth Laser- 1.8 auto. 1994 Mitsubishi Eclipse- GS auto. RIP 12/5/02 |
|
|
|
Nov 29 2005, 05:18 PM
Post
#24
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
QUOTE (90GSX @ Nov 29 2005, 03:24 PM) Ive gone through it countless times (and a new head) on my gsx before i got it right. thats the reason I don't want to try it myself. -------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
Nov 29 2005, 05:53 PM
Post
#25
|
|
|
DSM Tech Wizard ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2,404 Joined: 16-December 03 From: Fletcher/Bloomington Member No.: 214 |
I can attest to Rob's DSM capabilities. He is the ultimate go-to guy when it comes to this type of work. Just this fall he helped me with a complete headgasket, waterpump, radiator, coolant hoses, ARP headstuds, and timing belt tensioner job. I don't like doing it by myself, but I do like helping in every aspect. Rob was pretty respectful of this and asked for my help throughout the project. We had to line up the cam gears several times but, after the fourth or fifth time, we got it right. I reccomend at least having someone knowledgeable stand over you if you're going to attempt it yourself. Things you might consider while the T-belt is off
new timing belt tensioner new water pump new crank pulley dampener new belts Most of those things are easier while the T-belt is off or you take them off anyway. Let us know how it goes and good troubleshooting on the BISS and timing deal! -------------------- "I hear he tunes the space shuttle also...and that thing is fast"
|
|
|
|
Nov 29 2005, 06:07 PM
Post
#26
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
thanx for the advise.
I was about to give up on the car it was a last resort to switch the plug wires. -------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
Nov 29 2005, 11:38 PM
Post
#27
|
|
![]() DSMCentral Freak Group: Tech Moderators Posts: 388 Joined: 19-September 02 From: Pekin Member No.: 11 |
QUOTE (turbohcar @ Nov 29 2005, 05:53 PM) Just this fall he helped me with a complete headgasket, Did he drop any lettuce in one of the cylinders while the head was off I remember everything, except important things -------------------- Brian J
1996 Talon TSI AWD Great indeed is the power of the dragon as the sun, yet humbly and slowly it meanders its way shy, minuscule indeed is the power of the tiny scorpion, yet it swaggers its tail and boasts to the sky. |
|
|
|
Nov 30 2005, 09:47 AM
Post
#28
|
|
|
DSM Tech Wizard ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2,404 Joined: 16-December 03 From: Fletcher/Bloomington Member No.: 214 |
-------------------- "I hear he tunes the space shuttle also...and that thing is fast"
|
|
|
|
Nov 30 2005, 10:19 AM
Post
#29
|
|
|
DSM Tech Wizard ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2,256 Joined: 10-January 01 From: central IL Member No.: 10 |
QUOTE (scorp28 @ Nov 30 2005, 12:38 AM) Did he drop any lettuce in one of the cylinders while the head was off I remember everything, except important things Hmmm.... don't recall this one.... feel free to refresh my memory! -------------------- The fastest car I own is a minivan....
|
|
|
|
Nov 30 2005, 07:17 PM
Post
#30
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
hmmmm....I will have to remember not to get him a salad for helpping me with my car.
-------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
Nov 30 2005, 10:44 PM
Post
#31
|
|
![]() DSMCentral Freak Group: Tech Moderators Posts: 388 Joined: 19-September 02 From: Pekin Member No.: 11 |
Not anything all that funny, I just remember being at your place when you were putting a head on the old race car and just happened to see a piece of lettuce in the cylinder after taking a burger break.
Don't ask me how I remember stupid unimportant stuff, I guess it's a gift. -------------------- Brian J
1996 Talon TSI AWD Great indeed is the power of the dragon as the sun, yet humbly and slowly it meanders its way shy, minuscule indeed is the power of the tiny scorpion, yet it swaggers its tail and boasts to the sky. |
|
|
|
Dec 1 2005, 08:25 AM
Post
#32
|
|
|
DSM Tech Wizard ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2,404 Joined: 16-December 03 From: Fletcher/Bloomington Member No.: 214 |
Darn Dirty Rob!
-------------------- "I hear he tunes the space shuttle also...and that thing is fast"
|
|
|
|
Dec 1 2005, 04:37 PM
Post
#33
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,754 Joined: 25-June 04 From: 61554 Member No.: 314 |
soooooo did he eat the lettuce???
-------------------- ┌∩┐(◣_◢)┌∩┐
![]() |
|
|
|
![]() ![]() |
| Lo-Fi Version | Time is now: 18th November 2026 - 09:10 AM |