 Oil filter loose? Resolution will be yours. |
 Sep 4 2004, 03:42 PM
Post
#1
|
|
 Zen Master DSM  Group: Moderators Posts: 3,008 Joined: 10-January 01 From: in front of you Member No.: 5  |
I put a 90 deg hose barb in the hole in the back of the block that is usually plugged and ran a hose up to a breather filter at the top of the engine on the firewall. The real reason the hole is there is to allow a screwdriver or whatever to be inserted to stop the bs from rotating (if you still have one) when loosening and tightening the oil pump nut. Since I don't have a balance shaft there, it seemed to be a good place for some extra crankcase ventilation.
|
 |
 
|
Posts in this topic
  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 8th October 2025 - 09:29 PM |
Powered By IP.Board
© 2025 IPS, Inc.