Silver or White? Options

[turbohcar]

I am currently in the process of swapping an Autometer gauge I have for a Greddy EGT from a guy in Florida. He seems to be very cooperative, replying to my emails (usually daily for about a week and a half) and even agreed to meet me while I'm in the area in June. So, all things aside, I'm pretty comfortable with it. Now, here's where I need your help. Did Greddy ever make a silver face EGT? The website only lists white and black faces but the picture makes it look almost silver. I have no reason to doubt him because he's shown me nothing but kindness but, people do put on their faces sometimes. He has assured me that it is a white face (which is what I want so it matches my Phantom boost gauge). Here's a link to the picture he sent me and I'm emailing him back to verify that it's a 60mm gauge and not a 52mm (so that it fits in my gauge pod). Thanks

Greddy EGT

[turbohcar]

Just in case anyone else runs into this problem, I got a reply on DSMtuners.

yes they made them in silver (called it a limited color) good thing is they have a backlight that matches DSM stock clusters VERY WELL. compared to the white and black that back light in greeen. Yes it looks like the proe is not in the picture, but even if its missing TRE has a GOOD probe that is pretty cheap. here is a link that that shows the silver face at night http://www.roadraceengineering.com/...atchatnight.jpg

as far as sizes go, a 52 is about the same as a 2 1/16 which is a standard autometer size. The 60mm is a little big gaugepods.com has pillars for 52 or 60 or a combo of both. the 60mm is aboutt eh same as the average autometer 2 5/8 (think thats the size). you can hog out a Standard 2 1/16 pillar to fit a 60 but it look like crap IMHO.

I hope this helps someone else.