GSX issues Options

[90GSX]

Well i finally managed to get my car completely reassembled and it started right up. Amazingly everything is good, no leaks and boosts up just fine. A couple problems i have is 1. idle and 2. clutch engagement. I didnt do anything at all to the TB adjustment wise. I did block off the EGR, so maybe thats why its so high? When i fire it up, it goes to about 2k then after a minute or so it slows down to about 1k-1100 rpms. Maybe i need to back the screw out a bit? I didnt know if this would be egr related. Im not getting any surging, just idles a bit higher than it should.

The second issue i have is with the clutch. After the pedal weld and new clutch (spec stage 1) i have no grinds whatsoever in my transmission. But everytime i try to take off by slowly engaging the clutch, the car shudders really bad until its engaged and its fine. Doesnt shake going down the road or changing gears, just when i try to ease into it on taking off. If i pop it and launch the car it doesnt do it. I did have a machine shop resurface my flywheel and they seemed to know what they were doing. Is this normal for break in or is something wrong? It said on the clutch i have 500 miles break in and im only at 100 now.

Another issue i have is my logger doesnt seem to be working when i plug it in. I went over it and made sure it was hooked up right, and it worked fine last time i used it, this wouldnt be an ECU issue would it? I had my caps replaced and i just wanted to be sure that it wont be a cause of not getting any data.

[turbohcar]

I know you weren't, just thought that might help jog your memory.