Mar 1 2006, 10:03 PM
Post
#1
|
|
![]() Post Master ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 810 Joined: 9-July 03 From: Bloomington, IL Member No.: 151 |
Just wondering if any of you guys have heard anything about TREperformance fuel pumps. They claim to flow just like a Walboro, have a warrenty, all needed equipment, and list new for about $70. Anyone heard the good, the bad, and the ugly on these pumps?
|
|
|
|
![]() |
Mar 8 2006, 01:49 PM
Post
#2
|
|
|
DSM Tech Wizard ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2,404 Joined: 16-December 03 From: Fletcher/Bloomington Member No.: 214 |
QUOTE (jvb6806 @ Mar 3 2006, 08:42 AM) the walbro pump is a bit smaller than the stock pump and sits in the cradle a little funny but the denso pump is almost double the size of the walbro and fits in like a glove. the only thing the mention about buying the kit is installing the new filter and new O-rings. you can get orings anywhere and i am sure you can find a filter if the pump doesn't come with one for less than 20 bucks... or see if the stock filter will work. Just to update, I finished my fuel pump so I thought I'd shed some light on the subject. The Walbro pump does NOT fit in the cradle funny with the install kit. The Walbro sits in the cradle perfectly with the new rubber spacer at the bottom, which makes all the difference. I did have to modify the plastic spacer that goes between the pump and rubber gasket because the Walbro has a funny ridge right next to the pump output line. A little notching with the grinder and all was good. I'll take pictures if anyone needs them. Something else the kit comes with is a wiring harness for the pump as it uses a plug-in connector. I suppose you could use some female electrical connections if you really needed to though. -------------------- "I hear he tunes the space shuttle also...and that thing is fast"
|
|
|
|
MidwestDSM TRE fuel pumps? Mar 1 2006, 10:03 PM
jvb6806 you can get a new walbro for like 80 on DSMparts.c... Mar 1 2006, 10:10 PM
MidwestDSM Ah, cool. I musta been looking in the wrong places... Mar 1 2006, 10:14 PM
jvb6806 all you need is the pump not the whole kit. i thin... Mar 2 2006, 09:13 AM
turbohcar I do believe you need the kit to install a Walbro ... Mar 2 2006, 02:05 PM
jvb6806 what do you think you are going to need to install... Mar 3 2006, 08:42 AM
Mitsu 77 JVB is correct Mar 6 2006, 05:42 PM
turbohcar I bought my brand new Walbro through Slowboy Racin... Mar 7 2006, 07:37 PM
haunter QUOTE (turbohcar @ Mar 7 2006, 07:37 PM)I bou... Mar 8 2006, 10:39 AM
haunter QUOTE (turbohcar @ Mar 8 2006, 01:49 PM)I sup... Mar 8 2006, 03:44 PM![]() ![]() |
| Lo-Fi Version | Time is now: 23rd September 2026 - 11:23 PM |