![]() |
![]() |
![]()
Post
#1
|
|
![]() HONDA KILLER ![]() Group: Members Posts: 19 Joined: 17-March 06 Member No.: 845 ![]() |
i recently put on new control arms including bushings and ball joints along with new inner and outer tie rod ends and my car does ride better........BUT every once in a while when im turning or downshifting and turning onto a small ramp or whatever ill hear a big SNAP from under the car....i'm guessing this is either the stabilizer links (with worn off bushings) or possibly(stupidly) could be the CV joints....... PLEASE HELP by telling me ANYTHING!
|
|
|
![]() |
![]()
Post
#2
|
|
![]() Eats and sleeps DSM jargin. ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 1,108 Joined: 2-October 05 From: Waverly, Illinois Member No.: 636 ![]() |
Usually when you here a popping in the front end while turning is CV shafts. Did you take them out to do the work? I would double check the equal shaft if it is awd. My mechanic had mine and done the bearings and didn't get the half shaft locked on to the equal shaft right. It stripped the shit out of the teeth on the equal shaft. Hope this helps.
-------------------- |
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 8th October 2025 - 06:17 PM |