![]() |
![]() |
![]()
Post
#1
|
|
![]() HONDA KILLER ![]() Group: Members Posts: 19 Joined: 17-March 06 Member No.: 845 ![]() |
i recently put on new control arms including bushings and ball joints along with new inner and outer tie rod ends and my car does ride better........BUT every once in a while when im turning or downshifting and turning onto a small ramp or whatever ill hear a big SNAP from under the car....i'm guessing this is either the stabilizer links (with worn off bushings) or possibly(stupidly) could be the CV joints....... PLEASE HELP by telling me ANYTHING!
|
|
|
![]() |
![]()
Post
#2
|
|
DSM Tech Wizard ![]() ![]() ![]() ![]() ![]() ![]() ![]() Group: Members Posts: 2,404 Joined: 16-December 03 From: Fletcher/Bloomington Member No.: 214 ![]() |
I agree with GSXRacer, it's not a CV shaft if it's one big SNAP. The last time I encountered something like that was while working on an 86 RWD domestic and that was because the rear sway bar wasn't tightened down all the way on the new control arms. Check the sway bar to see if it's loose and anything else you might think of.
-------------------- "I hear he tunes the space shuttle also...and that thing is fast"
|
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 8th October 2025 - 06:10 PM |