![]() |
![]() |
![]()
Post
#1
|
|
![]() HONDA KILLER ![]() Group: Members Posts: 19 Joined: 17-March 06 Member No.: 845 ![]() |
i recently put on new control arms including bushings and ball joints along with new inner and outer tie rod ends and my car does ride better........BUT every once in a while when im turning or downshifting and turning onto a small ramp or whatever ill hear a big SNAP from under the car....i'm guessing this is either the stabilizer links (with worn off bushings) or possibly(stupidly) could be the CV joints....... PLEASE HELP by telling me ANYTHING!
|
|
|
![]() |
![]() ![]()
Post
#2
|
|
![]() Beginner ![]() Group: Members Posts: 40 Joined: 9-January 04 From: Peoria Member No.: 223 ![]() |
Hey dude I think its you lower control arm, jack it up pull the tire (assuming its only one side) get a large set of channel locks and start to try to twist all of the control arms. I am not sure what all you worked on but myself and a friend of mine had a similar problem,, do you hear any noises like a pop or clunk when you break just as the car stops and settles, usually in reverse. hope some of this has helped.. later and good luck
|
|
|
![]() ![]() |
Lo-Fi Version | Time is now: 8th October 2025 - 06:09 PM |