 initial startup issues |
 Sep 2 2006, 05:25 PM
Post
#1
|
|
 Person of Wisdom  Group: Members Posts: 110 Joined: 5-May 03 From: Granite City, IL Member No.: 128  |
welp, I just got my rebuilt motor in my 92 Talon AWD. The harnesses are all connected, IC pipe is ran. Literally everything is done except the damn thing wont start. The car cranks and im getting fuel but im not getting any spark. This may be because im using a 90 CAS that I wired into the 92 harness. However after checking the wiring diagrams I did wire it correctly, Another thing I was thinking is that the only sensor not hooked up is the sensor on the front of the tranny. The one with the ball on the end of it. I believe its a reverse light switch. Could this cause the car not to start? I printed some tests from alldata on how to test the coil pack so im going to do that now but any ideas will help.
Oh, one more thing. I noticed that on the old intake manifold there was a sensor bolted to the brace on the back of it. It has 2 wires coming out of it and has a silver square cap on it. The backside of it is filled with an epoxy material. Do I need this? I searched all over for a harness on my car but I cant find one that matches this one so I dont even know where to plug it in. Thanks alot guys. -------------------- Drew Taylor; 1992 Eagle Talon TSi AWD
 |
 |
 
|
 |
Replies
|
Sep 4 2006, 09:49 AM
Post
#2
|
|
 DSMCentral Freak Group: Members Posts: 259 Joined: 6-February 04 From: Bloomington Member No.: 233 |
You may want to try a different ignition transistor. I have had that little gem mess things up for me. I have an extra laying around if you need to borrow it to try that route.
-------------------- Yeah!!!!!!!!!!! AND WASH THAT THING OFF BEFORE YOU COME BACK!!! GROSS
FP 3065, Ported 2G exahust manifold, AEM EMS, 3" 02 housing, Shepard Racing Stage 3 tranny, Fadinza 8 LB. flywheel, Exedy stage 2 tripple puck thick ceramic cluch, 08 from the tank to filter, -6 to rail from filter, Aeromotive FPR 1:1 riseing rate, Crower Stage 4's. All of that and I don't know what I want to do next. |
|
|
|
Posts in this topic
fastclipse82 initial startup issues Sep 2 2006, 05:25 PM
AWD DSM 1 I think the CAS may be the culprit... I belive th... Sep 2 2006, 07:46 PM fastclipse82 Well as far as the little sensor, I looked on Ross... Sep 3 2006, 11:25 AM turbohcar That coil pack should have a different plug-in eve... Sep 3 2006, 09:19 PM
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: 17th June 2026 - 12:57 PM |
Powered By IP.Board
© 2026 IPS, Inc.