Oct 9 2007, 11:22 AM
Post
#1
|
|
|
Person of Wisdom ![]() ![]() ![]() Group: Members Posts: 151 Joined: 16-March 04 From: Jacksonville and Champaign IL Member No.: 260 |
Alright well for some reason when I push the clutch in and try to shift into gear it grinds right away. If i push the clutch in and hold it for a second then go to shift it shifts just fine. Please help me out cuz this is my daily driver and I really cant afford to grind gears and ruin my tranny.
Do any of you know why it grinds unless I hold it down? Could it be the slave cylinder itself going bad? Could the master cylinder? -------------------- Hopefully getting back into things w/ a 90 laser rs-t
|
|
|
|
![]() |
Oct 9 2007, 10:31 PM
Post
#2
|
|
|
Person of Wisdom ![]() ![]() ![]() Group: Members Posts: 151 Joined: 16-March 04 From: Jacksonville and Champaign IL Member No.: 260 |
Well I guess I'm going to replace the slave cylinder, master cylinder, get an extended rod for the slave cylinder and change my tranny fluid as i know it is syncromesh but not sure how old since I just bought the car. Then also get my solid cable end bushings in.
I have not done the master cylinder on one of these cars before. As far as I can tell from looking at it and please tell me if I am wrong because I dont want to go to rip it out and be wrong and then have to ask. 1. Drain the brake fluid & remove the line that goes into the slave cylinder 2. Screw the slave rod all the way, not sure if this is a good idea or not, just seems much easier than trying to remove that cotter pin and deal with all of that. 3. Unbolt it from the engine side and pull it right out? (are there any bolts on the inside I need to remove?) 4. Put the new one it, screw the rod back in, hook the line back up to the slave and fill it. 5. Bleed it, how do I bleed the master cylinder? Where do I hook up the hose to bleed it or do I? -------------------- Hopefully getting back into things w/ a 90 laser rs-t
|
|
|
|
cjk123 Help Oct 9 2007, 11:22 AM
black92_tsi_awd Pull the boot back on the slave, if there's fl... Oct 9 2007, 12:02 PM
cjk123 Is it if there is any fluid at all period? The sla... Oct 9 2007, 12:32 PM
black92_tsi_awd it's probably fine then.
You could try bleedin... Oct 9 2007, 01:49 PM
cjk123 I actually took it out and drove it. It seems to o... Oct 9 2007, 02:10 PM
cjk123 Is there anyone who knows a lot more about these c... Oct 9 2007, 02:15 PM
cjk123 Sorry man, im desperate Oct 9 2007, 02:32 PM
natedogg You bleed the master cylinder the same way you ble... Oct 10 2007, 08:53 AM
cjk123 Alright, I kind of thought that after I posted but... Oct 10 2007, 11:23 AM
black92_tsi_awd Yep, that's what I did.
Make sure you don... Oct 10 2007, 12:01 PM
cjk123 Alright sounds good, I already got the slave and m... Oct 10 2007, 07:04 PM
cjk123 Alright everything has been done to my tranny and ... Oct 18 2007, 10:31 PM
black92_tsi_awd Dropping the trans is not that hard. I've don... Oct 19 2007, 06:49 AM
cjk123 Okay so today I drained the whole system again, pu... Oct 19 2007, 01:35 PM![]() ![]() |
| Lo-Fi Version | Time is now: 17th November 2026 - 09:17 AM |