Oct 9 2007, 11:22 AM
Post
#1
|
|
|
Person of Wisdom ![]() ![]() ![]() Group: Members Posts: 151 Joined: 16-March 04 From: Jacksonville and Champaign IL Member No.: 260 |
Alright well for some reason when I push the clutch in and try to shift into gear it grinds right away. If i push the clutch in and hold it for a second then go to shift it shifts just fine. Please help me out cuz this is my daily driver and I really cant afford to grind gears and ruin my tranny.
Do any of you know why it grinds unless I hold it down? Could it be the slave cylinder itself going bad? Could the master cylinder? -------------------- Hopefully getting back into things w/ a 90 laser rs-t
|
|
|
|
![]() |
Oct 19 2007, 01:35 PM
Post
#2
|
|
|
Person of Wisdom ![]() ![]() ![]() Group: Members Posts: 151 Joined: 16-March 04 From: Jacksonville and Champaign IL Member No.: 260 |
Okay so today I drained the whole system again, put in the extended clutch slave rod and then refilled and rebled the system. It seems to be a little better now.
I dont think I could have bled the line any more either time. Both times I used 64oz of fluid. The pedal is stiffer than it used to be before I did all this but that wasn't the problem I was trying to fix. I will let you all know what happens when I take her out and drive her probably Sunday Night. -------------------- Hopefully getting back into things w/ a 90 laser rs-t
|
|
|
|
cjk123 Help Oct 9 2007, 11:22 AM
black92_tsi_awd Pull the boot back on the slave, if there's fl... Oct 9 2007, 12:02 PM
cjk123 Is it if there is any fluid at all period? The sla... Oct 9 2007, 12:32 PM
black92_tsi_awd it's probably fine then.
You could try bleedin... Oct 9 2007, 01:49 PM
cjk123 I actually took it out and drove it. It seems to o... Oct 9 2007, 02:10 PM
cjk123 Is there anyone who knows a lot more about these c... Oct 9 2007, 02:15 PM
cjk123 Sorry man, im desperate Oct 9 2007, 02:32 PM
cjk123 Well I guess I'm going to replace the slave cy... Oct 9 2007, 10:31 PM
natedogg You bleed the master cylinder the same way you ble... Oct 10 2007, 08:53 AM
cjk123 Alright, I kind of thought that after I posted but... Oct 10 2007, 11:23 AM
black92_tsi_awd Yep, that's what I did.
Make sure you don... Oct 10 2007, 12:01 PM
cjk123 Alright sounds good, I already got the slave and m... Oct 10 2007, 07:04 PM
cjk123 Alright everything has been done to my tranny and ... Oct 18 2007, 10:31 PM
black92_tsi_awd Dropping the trans is not that hard. I've don... Oct 19 2007, 06:49 AM![]() ![]() |
| Lo-Fi Version | Time is now: 18th November 2026 - 10:24 AM |