Possible bent valves Options

[slacker83]

Hi everyone I have been working on the talon lately and I tried to do a compression check and I have done them before just never on a talon. I pulled the mpi fuse and the coil pack connector put the tester in and got 0 psi on cylinder 1, then tried cylinder two and still 0. I checked the tool to make sure it was working okay and didn't have any leaks. It seemed fine so I decided to put the plugs back in and try to fire the car and no luck. I then looked at the timing belt and it looks like it has jumped a tooth or two. Also another reason I think some valves are bent is because I can't turn the crank manually. Right now I am sure I will be taking off the head but is there anything that I could be missing. This car was running before I took off the accessories and the oil filter housing. The only stuff I have done is put the accessories back on, oil filter housing, took out the spark plugs to do the compression check and change the oil. Let me know what you think. Here is a picture of the cam gears, maybe it will help diagnose the problem.

Thanks Steve

[slacker83]

I wouldn't think two gauges were bad. It looks like a machine shop in galesburg will be doing the head considering they are half the price then everyone else around here.