Welcome Guest ( Log In | Register )

> Hola
dualdj1
post Sep 16 2008, 02:12 PM
Post #1


DSMCentral Freak
****

Group: Admin
Posts: 490
Joined: 15-September 08
From: East Peoria, IL
Member No.: 8,716



Howdy all. I'm Jason, a friend of Kris G's from EP, and he suggested I drop in here and say hi.

A little about myself quick, then onto subject. I grew up under cars, from Fairbury originally (over by Pontiac), and have been working on them ever since. My current project is a 78 Mustang King Cobra with a 5.0HO EFI. Just finishing a full top end upgrade, and working on getting the cage finished out. I definately hope to make some auto-X events next year, so will likely be seeing some of you around there. I tend to stray from the norm, and go more towards performance than looks and like some non-traditional setups (IRS in a 78 mustang? Yes Pls!). I don't have any current pics of it (will have some after I get it running again), but some old pics of the project: http://www.brandttuning.com/pics/mustang. I work as a network admin during the day, and do some programming, and help out with a dirt Late Model and the track itself at Fairbury.


Back to my intentions... I'm in need of a used 2g head for a 95 talon. I started just doing a headgasket for a lady i work with, did service maint of timing belt, water pump, etc, got it back together and it's still leaking compression on 1 and 2 (starting from driver's side), same as before changing the gasket. Both block and head looked good, no visible cracks, and head didnt' appear to be warped. I'm going to pull the head back off and try and check it more closely to see if I missed something. So in the meantime I'm looking for a used head. I posted a WTB on the exchange: http://www.dsmcentral.com/exchange/detail.php?siteid=848

If anyone has any suggestions on where to look for the problem, I'd greatly appreciate it. Thanks and nice meeting you all!


--------------------
1978 Mustang II King Cobra
89 5.0HO, Stock Short Block, Ford F303 cam, 1.7:1 Crane Roller Rockers, Holley 650 Doubler Pumper, MSD 6AL, Pocket Ported stock heads, Hedman Long Tube Headers
5 spd Manual
Full roll cage, 9" full floater w/Currie trac lock/373 gears, RCI Fuel Cell
Project Page: http://www.brandttuning.com/projects.htm
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
akamiami
post Sep 17 2008, 12:21 PM
Post #2


Eats and sleeps DSM jargin.
******

Group: Moderators
Posts: 1,156
Joined: 23-September 02
Member No.: 16



Welcome to the site buddy!

I've done a 1g head in a 2g swap before, and while it's certainly not difficult, it may be a bit more of a pain that what you want to put up with. It all comes down to the availability of a decent 2g head I suppose.

Here's some info on the 1g head in a 2g.....

On a side note, I absolutely love RRE's humor....
QUOTE
Swapping a first generation cylinder head onto a second generation Eclipse.

For anyone considering the conversion these are the parts you need, preferably from a late (May) '92 thru '94 motor:

    * Cylinder head, with a fresh valve job, might as well do some porting while you have the chance but it isn't necessary. Best to use a May/92 and up head but a 90-91 head will work too, even a 90-94 non turbo head. The May/92 and up head has better cooling passages running between the head and block.
  * Stock head gasket or HK$ head gasket and ARP head studs if you are trying to be the king.
    * Intake manifold and gasket, can be from any year 1G turbo, they are all the same
    * Throttle body and gaskets (2) (MUST be May/90 and newer, 4 hose fittings on the top, 3 straight and one angled)
    * Coil pack and bracket (MUST be May/90-newer)
    * The big water pipe on the front of the motor (MUST be May/90- newer)
    * The complete water neck assembly on the side of the motor (MUST be May/90- newer)
    * The "u" shape water line that goes under the turbo (any year 90-94)


--------------------
my cars breath smells like car food
Go to the top of the page
 
+Quote Post

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 18th November 2026 - 10:16 AM
Design by: IPB Download & eBusiness Discussions