Welcome Guest ( Log In | Register )

> Hola
dualdj1
post Sep 16 2008, 02:12 PM
Post #1


DSMCentral Freak
****

Group: Admin
Posts: 490
Joined: 15-September 08
From: East Peoria, IL
Member No.: 8,716



Howdy all. I'm Jason, a friend of Kris G's from EP, and he suggested I drop in here and say hi.

A little about myself quick, then onto subject. I grew up under cars, from Fairbury originally (over by Pontiac), and have been working on them ever since. My current project is a 78 Mustang King Cobra with a 5.0HO EFI. Just finishing a full top end upgrade, and working on getting the cage finished out. I definately hope to make some auto-X events next year, so will likely be seeing some of you around there. I tend to stray from the norm, and go more towards performance than looks and like some non-traditional setups (IRS in a 78 mustang? Yes Pls!). I don't have any current pics of it (will have some after I get it running again), but some old pics of the project: http://www.brandttuning.com/pics/mustang. I work as a network admin during the day, and do some programming, and help out with a dirt Late Model and the track itself at Fairbury.


Back to my intentions... I'm in need of a used 2g head for a 95 talon. I started just doing a headgasket for a lady i work with, did service maint of timing belt, water pump, etc, got it back together and it's still leaking compression on 1 and 2 (starting from driver's side), same as before changing the gasket. Both block and head looked good, no visible cracks, and head didnt' appear to be warped. I'm going to pull the head back off and try and check it more closely to see if I missed something. So in the meantime I'm looking for a used head. I posted a WTB on the exchange: http://www.dsmcentral.com/exchange/detail.php?siteid=848

If anyone has any suggestions on where to look for the problem, I'd greatly appreciate it. Thanks and nice meeting you all!


--------------------
1978 Mustang II King Cobra
89 5.0HO, Stock Short Block, Ford F303 cam, 1.7:1 Crane Roller Rockers, Holley 650 Doubler Pumper, MSD 6AL, Pocket Ported stock heads, Hedman Long Tube Headers
5 spd Manual
Full roll cage, 9" full floater w/Currie trac lock/373 gears, RCI Fuel Cell
Project Page: http://www.brandttuning.com/projects.htm
Go to the top of the page
 
+Quote Post
 
Start new topic
Replies
dualdj1
post Sep 25 2008, 10:06 AM
Post #2


DSMCentral Freak
****

Group: Admin
Posts: 490
Joined: 15-September 08
From: East Peoria, IL
Member No.: 8,716



Just a quick update, pulled the head back off, found no cracks at all, but a very slight warpage - 0.015" gap b/t 1 & 2, tolerance is 0.0020".

Napa in Fairbury will mill it down for $45. If anyone ever wants to deck their head, this seems like a good deal and the guy has done several of them for the hornet drivers in town (who aren't supposed to do engine mods of course)


--------------------
1978 Mustang II King Cobra
89 5.0HO, Stock Short Block, Ford F303 cam, 1.7:1 Crane Roller Rockers, Holley 650 Doubler Pumper, MSD 6AL, Pocket Ported stock heads, Hedman Long Tube Headers
5 spd Manual
Full roll cage, 9" full floater w/Currie trac lock/373 gears, RCI Fuel Cell
Project Page: http://www.brandttuning.com/projects.htm
Go to the top of the page
 
+Quote Post

Posts in this topic


Reply to this topicStart new topic
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: 18th November 2026 - 10:17 AM
Design by: IPB Download & eBusiness Discussions