opinions wanted Options

[Justincredible]

So heres my current set-up

~Evo III Big 16g
~MAF Translator
~3" gm maf
~full throttle AFPR
~DSR intercooler
~DSR intercooler piping
~3" cat-back
~3" DP with o2
~Krisj144 intake
~K&N filter
~PTE 680 injectors
~Walbro 255 pump
~evo 3 manifold
~act 2600 clutch
~EGT gauge
~boost gauge
Basically I need one more gauge. But I'm unsure of what.

What I want your opinion on is there anything else you can think of that I'm missing. I've got about 500 bucks left in the budget. Ive thought of things such as chromoly flywheel, bigger brake set-up(but new brakes are on the car), fluidyne and slim fans, wider wheels and better tires.

So with all that said. What do you guys think???

[ICGerms]

If indeed you do have the extra cash (no unforseen expenses, e.g. machine shop time, bad ball joints or tie rod ends) you could probably get a lighter flywheel (XACT is good) and a SAFC. I'm not sure why Kris thinks you're moving too fast, though, perhaps he knows some extra details that we're not privvy to. A large chunk of change will be spent at the machine shop if you need anything done there (e.g. boring, honing, cleaning the block, benchflowing the head, replacing valves/seals/guides, etc). Otherwise, it looks like you're pretty hooked up. Also, don't forget fluids, belts, gaskets/seals, and if you're doing it yourself, a case of PB Blaster and a case of brake parts cleaner (degreases better than engine degreaser) and a truckload of rags.